595326
13
Zoom out
Zoom in
Previous page
1/54
Next page
13
IEGB
Operation
1. Direction switch
You can toggle between right and left ro-
tation by pushing the direction of rotation
switch (
3).
If you move the direction switch (
3) to
the middle position, the device is secured
against being switched on. You can con-
tinue using the LED lamp when the switch
lock is activated. To do so, press the on/
off switch.
The direction changed may
only be performed in stand-
still mode!
2. Using the tool holder
Pull the locking sleeve ( 2) forward and
push the bit insert as far as it will go into the
tool holder (
1). Release the locking sleeve
(
2) again; the bit insert is xed in place.
Check that the bit insert is locked in the tool
holder by pulling on it.
The tool holder is not suitable
for short 25 mm bits! Use the
bit holder (
15) supplied for
short bits.
3. Switching on/off
By using the on/off switch (
12) you can
progressively control the speed. The LED
work light (
13) is automatically turned on.
The further you push the on/off switch, the
higher the speed and tightening torque.
To turn it off, release the on-off button.
When you move the direction switch (
3)
to the middle position, the device is secured
against being switched on. In this position,
the LED work light (13) can still be used.
The tightening torque depends on the se-
lected speed and impact duration.
The tightening torque actual-
ly achieved must be checked
in all cases with a torque
wrench !
Cleaning and
maintenance
Contact our Service Centre about
repairs and servicing not described
in this manual. Only use OEM
parts. Risk of injury!
Turn off the appliance and, before
doing any servicing, remove the
battery.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.
Cleaning
Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or solvents.
You may otherwise irreparably dam-
age the appliance.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PDSSA 18 A1 - IAN 104449 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDSSA 18 A1 - IAN 104449 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PDSSA 18 A1 - IAN 104449

Parkside PDSSA 18 A1 - IAN 104449 User Manual - French - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info