679088

Parkside PDSSA 12 A1 - IAN 302331 Manual

10
Zoom out
Zoom in
Previous page
1/40
Next page
PDSSA 12 A1
GB
│
IE
│
NI
│
CY 
│
 7 ■
Before use
Removing/charging/inserting the
battery pack
CAUTION!
► Always unplug the appliance before you
remove the battery pack
from or connect
the battery pack to the charger.
NOTE
► The battery is supplied partially charged.
Before first use, charge the battery in the
charger for at least 1 hour. This guarantees
full battery performance. You can charge the
lithium-ion battery at any time without short-
ening its service life. Interrupting the charging
process does not damage the battery.
■ Never charge the battery pack
if the am-
bient temperature is below 10°C or above
40°C.
1. To remove the battery pack
, press the release
button and pull the battery pack out of the
appliance.
2. Insert the battery pack into the high-speed
charger .
3. Insert the mains plug into the socket. The control
LED
lights up red.
4. The green charge status indicator LED indi-
cates that the charging process is complete and
the battery pack is ready.
5. Insert the battery pack back into the appliance.
Checking the battery charge level
If the appliance is switched on, the charge level will
be shown on the battery LED as follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Switching the hammer function on/
off
CAUTION!
► Operate the hammer function switch
only
when the appliance is at a standstill. Other-
wise the appliance can be damaged.
Switching the hammer function on:
♦ Move the hammer function switch into the
position to activate the hammer function.
Switching the hammer function off:
♦ Move the hammer function switch into the
position to deactivate the hammer function.
2-speed gearbox
CAUTION!
► Operate the speed selection switch
only
when the appliance is at a standstill. Other-
wise the appliance can be damaged.
No hammer function
In first gear (speed selector switch in posi-
tion: 1)
you can reach a speed of approx. 400 rpm and a
low torque. This setting is suitable for all screwing
jobs.
No hammer function
In second gear (speed selector switch in
position: 2)
you can reach a speed of approx. 2200 rpm for
carrying out drilling work.
With hammer function
In first gear (speed selector switch in posi-
tion: 1)
you can reach a speed of approx. 600 rpm and a
high torque. This setting is suitable for all screwing
jobs.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PDSSA 12 A1 - IAN 302331 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDSSA 12 A1 - IAN 302331 in the language / languages: English, German as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PDSSA 12 A1 - IAN 302331

Parkside PDSSA 12 A1 - IAN 302331 User Manual - Dutch, French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info