595416

Parkside PDSP 1000 B2 - IAN 43089 Manual

25
Zoom out
Zoom in
Previous page
1/29
Next page
21
PDSP 1000 B2
GB
Mount the collecting bag for sand-
blasting material
■ Use a screwdriver to attach the collecting bag
to the appliance with the supplied screw
clip
.
Select and fi tting attachments
■ Start by selecting the appropriate attachment
for the job at hand (
, , ,
).
■ Push the selected attachment fi rmly onto the jet
nozzle , ensuring that no air can escape from
the sides.
Using the compressed air sand-
blaster gun
■ Carefully prepare the workpiece that is to be
blasted. Clean it if need be.
NOTE
►
Layers of dust or fat will signifi cantly impair
the results.
■ Carefully cover or mask everything that is not to
be blasted.
■ The distance between the attachment and the
surface being worked plays an important role
and should be kept as low as possible so that
the blasting medium can be collected by the
collecting .
■ The nearer you are to the workpiece, the smaller
the dispersion pattern and vice versa.
■ Do a test run on an old workpiece to fi nd out
the correct distance/working pressure and avoid
excessive refl ection from your workpiece.
Switching on:
■ Set the control dial to "1" to open the air
outlet.
■ Move the compressed air sandblaster
close
to the area to be worked.
■ Press the trigger to start operating the com-
pressed air sandblaster gun .
Switching off :
■ Release the trigger to switch off of the com-
pressed air sandblaster gun
.
■ Set the control dial to "0" to close the air
outlet.
■ Disconnect the appliance from the compressed
air source after you fi nish work.
NOTE
►
First detach the hose from the compressed air
source before disconnecting the supply hose
from the appliance.
In this way you avoid uncontrollable thrashing
about of the supply hose.
Collecting bag for sandblasting
material
NOTE
►
Do not re-use surplus sand-blasting material
from the collecting bag until it has been
cleaned.
■ You can remove the surplus sand-blasting material
that has collected in the collecting bag via
the zip fastener or use a screwdriver to undo
the screw clamp and remove the collecting
bag from the appliance.
IB_43089_PDSP1000B2_LB2.indb 21IB_43089_PDSP1000B2_LB2.indb 21 28.05.14 09:0528.05.14 09:05
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PDSP 1000 B2 - IAN 43089 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDSP 1000 B2 - IAN 43089 in the language / languages: French as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PDSP 1000 B2 - IAN 43089

Parkside PDSP 1000 B2 - IAN 43089 User Manual - English, German, Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info