595307
10
Zoom out
Zoom in
Previous page
1/45
Next page
6
PDSP 1000 B2
GB
IE
Troubleshooting
Fault/possible cause Remedy
No material flow
The air is not dry
enough.
Install a water separator
in your compressed air
system.
Air pressure too low
Increase the output
pressure of your com-
pressor.
Attachment not sitting
correctly
Ensure that the attach-
ment is firmly on the
appliance and that
no air escapes at the
sides.
Blocked sand-blasting
material pipes
Check that no lumps of
sandblasting material
are blocking the pipes.
Preferably use a
blow-off gun to clean
blocked pipes.
(Wear protective
glasses!) Also check
the outlet opening of
the tank.
Sand-blasting pattern not as expected
The air is not dry
enough.
Install a water separ-
ator in your com-
pressed air system.
Grain size of the sand-
blasting material not
uniform
Replace sand-blasting
material.
Sand-blasting material
impure
Clean/replace sand-
blasting material
The attachment is worn
out
Replace the attach-
ment
Other defects
Please contact an expert or your retailer.
Components
(see back fold-out page)
Item no. Description Amount
01 Housing 1
02 Screw 2
03 Screw 1
04 O-ring 1
05 Pin 1
06 Air valve spring 1
07 O-ring 1
08 Screw nut 1
09 Spring 1
10 Trigger 1
11 Air inlet 1
12 Socket 1
13 Nozzle 1
14 O-ring 2
15 Beaker ring 1
16 Connecting piece 1
17 Nozzle 1
18 Control lever 1
19 O-ring 1
20 Connection lever 1
21 Pin 1
22 Adjusting knob 1
23 Screw 1
24 Container 1
25 Screw nut 1
26 O-ring 1
27 Protective cover 1
28 Screw 1
29 Screw cap 1
30 Handle cover 1
31 Nozzle 1
32 Nozzle 1
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PDSP 1000 B2 - IAN 109801 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDSP 1000 B2 - IAN 109801 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info