674500
16
Zoom out
Zoom in
Previous page
1/60
Next page
PDR 12 A1
GB│IE
13
CAUTION!
Never fill the water tank with solvents, liquids
containing solvents, or undiluted acids (e.g.
cleaning agents, petrol, paint thinner, acetone).
They could damage the materials used in the
appliance.
Do not leave the appliance unattended while
it is in operation.
Do not leave the appliance unattended while
it is connected to the power supply.
Place the appliance on a firm, level surface to
ensure stability.
CAUTION!
Do not operate the appliance at temperatures
below 0°C.
Safety equipment
CAUTION
Do not change or bypass the safety functions of
the appliance. They are there for your safety.
The safety equipment is designed to protect the user and may not be
deactivated or repurposed.
Pressure switch
The pressure switch activates the low-pressure spray jet. When you let go
of the trigger, the low-pressure spray jet stops.
Appliance switch
The appliance switch prevents the appliance from being switched on
unintentionally.
Motor protection circuit breaker
The appliance switches off automatically when the power consumption
becomes too high.
Before use
Operating the appliance on a 12 V circuit
WARNING!
The current tolerance of your vehicle's wiring system must be
compatible with the connected appliance.
Refer to your vehicle handbook (cigarette lighter).
Remove the charging socket cover
.
Connect the correct end of the 12 V cable
to the 12 V socket
on the appliance.
Connect the 12 V connector plug
10a
with a suitable socket. This is
usually the cigarette lighter socket on the dashboard of your vehicle.
Many vehicles have a second socket by the rear seats or in the boot.
The red LED on the 12 V connector plug
10a
lights up.
You can now run the appliance on the 12 V socket. Please note that
this does not charge the battery.
Disconnect the 12 V connector plug
10a
from the cigarette lighter socket
when you are finished using the appliance.
Remove the 12 V cable
from the 12 V socket .
Close the 12 V socket
again by replacing the charging socket
cover .
Charging the appliance with the mains adapter
NOTE
While the battery is charging, the status LED
lights up red.
When the battery is fully charged, the status LED
lights up green.
It takes approximately 1 hour for the battery to charge fully when
empty.
Remove the charging socket cover
.
Connect the end of the charger cable
to the charging socket on the
mains adapter
5a
.
Plug the mains adapter
into a mains power outlet.
Disconnect the mains adapter
from the mains power outlet and the
charging socket of the mains adapter
5a
as soon as the battery is fully
charged.
Replace the charging socket cover
to close the charging socket.
Filling the water tank
Turn the water tank towards the
Open
mark until you can pull the
water tank
off the base
. Hold the base firmly with one hand to
create suitable counter-pressure.
Open the lid
of the water tank . Use a tap to fill the water tank
with water. Do not fill the tank beyond the 5 l mark.
NOTE
The water tank
has a capacity of 5 litres.
Fill the water tank
with fresh water only.
Do not open the lid
during operation.
Close the lid
of the water tank .
Put the water tank
back on the base
. Turn the water tank
towards the
Close
mark on the base until it clicks into place.
Hold the base firmly with one hand to create suitable counter-pressure.
Ensure that the I mark on the base
is aligned with the I mark on the
water tank
when it has clicked into place.
Operation
Switching the appliance on
CAUTION!
If the pump runs for 2 minutes without drawing in liquid, it will run dry
and the appliance will be damaged.
Press the On/Off switch
to switch the appliance on. The status
LED
lights up green. The pump builds up pressure.
Turning the appliance off
Press the On/Off switch again to switch the appliance off.
The status LED
goes out.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PDR 12 A1 - IAN 297522 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDR 12 A1 - IAN 297522 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info