595411
27
Zoom out
Zoom in
Previous page
1/34
Next page
24
PDMS A1
GB
The grinder may not be used for drilling or
screwing!
The grinder is not approved for the use of cut-off
wheels!
The fl ow pressure of 6.3 bar may on no account
be exceeded during operation.
Never use oxygen or other fl ammable gases as
an energy source.
Once you have completed your work, switch
the grinder off and place it down securely once
it has come to a standstill.
Caution ! Grinder continues to run.
Once you have completed your work, disconnect
the grinder from the compressed air supply.
Be aware of the danger that dust and vapours,
which can create an explosion-hazardous
atmosphere, can occur when processing certain
materials. Use vacuum cleaners and suitable
protective equipment.
Hazards caused by parts fl ung out
If a workpiece or accessory or even part of the
machine tool itself breaks, parts can be fl ung
out at high speeds.
When using the grinder for grinding pencils or
when replacing accessories on the machine,
impact-proof eye protection must be worn. The
degree of necessary protection must be evaluated
especially for each individual purpose.
You must ensure that the workpiece has been
securely fi xed.
Check regularly to ensure that the grinder
rotational speed does not exceed the rotational
speed stated on the grinding pencils. This
rotational speed monitoring must take place
without an installed grinding pencil / grinding
aid and in agreement with the manufacturer's
instructions.
Ensure that any sparks and fragments caused
during use do not present any hazards.
Disconnect the grinder from the power supply
before replacing the grinding material and
before servicing.
In this case, the risks for others should also be
assessed.
Hazards caused by entanglement
Suff ocation, scalping or and/or cut wounds can
occur if loose clothing, jewellery, necklaces, hair
or gloves are not kept away from the machine and
its accessories.
Hazards during operation
Avoid contact with the rotating shaft and the
installed tools in order to prevent cuts to the
hands and other body parts.
When using the machine, the operator's hands
can be subject to hazards such as cuts, grazing
and heat. Wear suitable gloves to protect your
hands.
The operator and maintenance personnel must
be physically capable of handling the size,
mass and power of the machine.
Hold the machine correctly: be ready to
counteract any normal or sudden movements -
have both hands ready.
Ensure that your body is balanced and that you
have a secure standing position.
Use only lubricants recommended by the
manufacturer.
Suitable protective goggles must be worn;
wearing of safety gloves and safety clothing
is recommended.
A rotating fi le may not be operated at a speed
higher than its nominal speed.
Wear a safety helmet if working above your
head.
Please note that the machine tool continues to
run after completion of the working process.
Warning is hereby made of the risk of explosion
or fi re due to the material being worked.
Release the start/stop control in case of a
disruption to the electricity supply.
Risks due to repetitive movements
When using a mini die grinder to perform work-
related activities, operators may experience
uncomfortable sensations in their hands and
arms, as well as in the neck and shoulders or
other parts of the body.
When using a mini die grinder, the operator
IB_43105_PDMSA1_LB2.indb 24IB_43105_PDMSA1_LB2.indb 24 14.05.14 11:1614.05.14 11:16
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PDMS A1 - IAN 43105 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDMS A1 - IAN 43105 in the language / languages: French as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PDMS A1 - IAN 43105

Parkside PDMS A1 - IAN 43105 User Manual - English, German, Dutch - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info