779307
21
Zoom out
Zoom in
Previous page
1/82
Next page
PDKS 6.3 B3
18 GBIENI
Fitting/changing the saw blade
CAUTION!
If the saw blade is blunt, bent or defective, it must be
replaced immediately.
When changing the saw blade , always make sure that the
compressed-air supply is disconnected!
First open the cover using a Phillips screwdriver.
Then use the enclosed 4 mm hex key to loosen the hexagon
socket screws for the saw blade holder and remove the
saw blade .
Then set the new saw blade into the saw blade holder
and tighten the hexagon socket screws for the saw blade
holder firmly.
Make sure that the saw blade is correctly fitted in the saw
blade holder and can no longer be pulled out.
Then close the cover again using the Phillips screwdriver.
Adjusting/changing the stop bracket
Loosen the hexagon socket screw for the stop bracket using
the enclosed 2 mm hex key .
After loosening the hexagon socket screw the stop bracket
can be removed by pulling.
Now an adjustment or a complete exchange of the stop
bracket is possible.
After changing or adjusting the stop bracket , retighten the
previously loosened hexagon socket screw using the 2 mm
hex key .
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PDKS 6.3 B3 - IAN 339157 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDKS 6.3 B3 - IAN 339157 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info