Manual Parkside PDFW 120 A2 - IAN 353549 (page 18 of 65) (English)

762964

Zoom out

Zoom in

1/65

PDFW 120 A2

■ 14 │ GB│IE│NI│CY

Fitting tools onto the ﬂexible shaft

♦ Push the black collar all the way back onto

the ﬂexible shaft to lock the spindle. Note

that the collet chuck mount is loosened in an

anticlockwise direction. Hold the black collar

in this position.

♦ Use the combination spanner to undo the

collet chuck mount on the ﬂexible shaft .

♦ Fit the tool and screw the collet chuck mount

back into place.

♦ Release the black collar .

Changing the collet chuck

You can change the collet chuck if the shaft

diameter of the tool you want to use is diﬀerent.

♦ Push the black collar all the way back onto

the ﬂexible shaft to lock the spindle. Note

that the collet chuck mount is loosened in an

anticlockwise direction. Hold the black collar

in this position.

♦ Use the combination spanner to undo the

collet chuck mount on the ﬂexible shaft .

Unscrew the collet chuck mount .

♦ Remove the collet chuck and replace it with

a collet chuck with the desired diameter.

♦ Replace the collet chuck mount back on the

ﬂexible shaft . Screw the collet chuck mount

tight using the combination spanner .

♦ Release the black collar .

Using the work arbor for cutting discs

♦ Use the screw driver side of the combination

spanner to undo and tighten the screw of the

work arbor for cutting discs .

♦ Fit the work arbor for cutting discs as

described into the ﬂexible shaft .

♦ Use the combination spanner to undo the

screw on the work arbor for cutting discs .

♦ Fit the desired cutting disc / onto the screw

between the two washers.

♦ Use the combination spanner to tighten the

screw on the work arbor for cutting discs .

Use the work arbor for polishing felts

♦ Screw the tip of the work arbor for polishing

felts clockwise into the corresponding hole

in the polishing felts / .

♦ Fit the work arbor for polishing felts as

described into the ﬂexible shaft .

Using the work arbor for abrasive belts

♦ Push the required abrasive belt / com-

pletely onto the corresponding work arbor for

abrasive belts / .

♦ Use the combination spanner to tighten the

screw on the work arbor / to fasten the

abrasive belts.

♦ Fit the work arbor for abrasive belts / as

described into the ﬂexible shaft .

Notes on working with materials/

tools/speed range

■ Never use the appliance for other purposes

and only use original parts/accessories. Using

attachments or accessory tools other than those

recommended in the operating instructions can

lead to a risk of injury.

■ Determine the rotational speed range for work-

ing on zinc, zinc alloys, aluminium and copper

by trying it out on test pieces.

■ Use a low rotational speed for work on plastics

and materials with a low melting point.

■ Use a high rotational speed for working on

wood.

■ Carry out cleaning, polishing and buﬃng work

in the medium speed range.

The following are recommendations only and not

binding. When carrying out practical work, carry

out your own tests to see which tool and which set-

tings are ideal for the material you are working on.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDFW 120 A2 - IAN 353549 in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PDFW 120 A2 - IAN 353549

Parkside PDFW 120 A2 - IAN 353549 User Manual - German - 25 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PDFW 120 A2 - IAN 353549 Manual

Product: