762964

Parkside PDFW 120 A2 - IAN 353549 Manual

15
Zoom out
Zoom in
Previous page
1/65
Next page
PDFW 120 A2 GB│IE│NI│CY │ 11 ■
■Use an extension cord for outdoor use! Use
only suitably certified and labelled extension
cords outdoors.
■Remain alert at all times! Pay attention to what
you are doing. Proceed with caution when
working with the tool. Do not use the power tool
when distracted.
■Check the power tool for any damage! Before
continuing to use the power tool, check all safety
devices and any slightly damaged parts to make
sure they function properly and as intended.
■ Check that all moving parts work properly with-
out jamming and whether parts are damaged.
All parts must be properly fitted and meet all
the conditions to ensure the proper operation of
the power tool. Damaged safety devices and
parts must be properly repaired or replaced
by a specialist workshop unless otherwise indi-
cated in the instructions.
■ Damaged switches must be replaced at an
authorised customer service centre.
■ Do not use any power tools that you cannot
switch on and off with the power switch.
CAUTION! The use of other tools and accesso-
ries could lead to an increased risk of personal
injury for you.
■Have your power tool repaired by a qualified
electrician! This power tool complies with all
relevant safety regulations. Repairs may only
be performed by a qualified electrician using
original spare parts; otherwise this could lead
to accidents for the user.
Appliance-specific safety instructions
WARNING!
► Do not use damaged or deformed discs or
brushes.
■ Use only grinding discs and brushes whose
imprinted speed rating is at least as high as that
on the type plate on the power tool.
■ Adjust the spark deflector occasionally to com-
pensate for wear on the disc. Ensure that the
distance between the spark deflector and the
disc is a small as possible and is never more
than 2 mm.
■ Always leave the tool attached to the spindle
to reduce the risk of contact with the rotating
spindle.
Residual risks!
Even if you operate this power tool properly, there
will still be residual risks. The following risks can
occur in the context of the design and construction
of this power tool:
a) Lung damage, if no suitable breathing protection
is worn.
b) Hearing damage, if no suitable hearing protec-
tion is worn.
c) Damage to health caused by vibrations if the
appliance is used for extended periods or is not
properly used and maintained.
WARNING!
► The power tool creates an electromagnetic
field during operation. This field can, in certain
circumstances, impair active or passive medical
implants. To reduce the risk of fatal injuries, we
recommend that people with medical implants
consult their doctor and the manufacturer of
the medical implant before operating this
machine.
Before use
NOTE
► Please note that you must always fit
-- the tool rests ,
-- the spark deflectors ,
-- and the eye shields
as required for the grinding or buffing
disc .
► Please note that you will require tools which
are not included in delivery for the assembly.
Fitting the tool rests
Fit the tool rests onto the device using the
supplied knurled screws (See fig. B):
♦ Hold the relevant nut into the appropriate recess
with a finger.
♦ Now use the knurled screw to attach the
workpiece rest firmly onto the device.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PDFW 120 A2 - IAN 353549 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDFW 120 A2 - IAN 353549 in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PDFW 120 A2 - IAN 353549

Parkside PDFW 120 A2 - IAN 353549 User Manual - German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info