Manual Parkside PDFP 500 B2 - IAN 96898 (page 26 of 28) (English, German, Dutch)

595410

Zoom out

Zoom in

1/28

26 GB

Disposal / Translation of the original declaration of conformity / ManufacturerMaintenance and Cleaning / Service / Warranty

some materials of the paint spray gun. This can

lead to dangerous reactions.

ATTENTION! Never immerse the paint spray

gun completely in solvent.

After each use, spray thinner (only in the

open

air – danger of explosion!) or water

through the device.

To clean the casing, nozzle head

and the

spray holes inside it, use a cloth or the cleaning

brush provided. Never use petrol, solvents or

cleaning agents that attack plastic.

First unscrew the stroke stop screw

by turning

it anti-clockwise

Remove the spring

Remove the needle

with the aid of pliers

(see Fig. A).

Clean the needle

carefully with the brush

also refer to Fig. B.

Replace the needle

in the paint spray gun.

Position the spring

on the end of the needle

Tighten the stroke stop screw

by turning it

clockwise

Unscrew the ﬂow cup

from the gun by tur-

ning anticlockwise

Remove the ﬁlter

, as shown in Figure C, and

clean it with the cleaning brush.

Clean the interior screw thread

of the ﬂow

cup

with the cleaning brush (see Fig. D).

Replace the ﬁlter in the gun (see Fig. C) and tigh-

ten the ﬂow cup

by turning it clockwise .

For rust protection you can spray sewing ma-

chine oil through the device after cleaning.

Lubricate all moving parts from time to time.

After cleaning the needle, the thread and seal

must be lightly treated with grease.

Do not use any lubricants containing silicone.

Only store compressed air tools in dry areas.

Service

Compressed air-oper-

ated equipment should only be re

paired

by qualified specialists and with origi

nal

spare parts. This will ensure that devices

remain safe.

Note: Spare parts not listed (e.g. carbon brushes,

switches) can be ordered through our call centre.

Warranty

The warranty for this appliance is for 3

years from the date of purchase. The ap-

pliance has been manufactured with care

and meticulously examined before deliv-

ery. Please retain your receipt as proof

of purchase. In the event of a warranty

claim, please make contact by telephone

with our Service Department. Only in this

way can a post-free despatch for your

goods be assured.

The warranty covers only claims for material and

maufacturing defects, but not for transport damage,

for wearing parts or for damage to fragile compo-

nents, e.g. buttons or batteries. This product is for pri-

vate use only and is not intended for commercial use.

The warranty is void in the case of abusive and im-

proper handling, use of force and internal tampering

not carried out by our authorized service branch. Your

statutory rights are not restricted in any way by this

warranty.

The warranty period will not be extended by repairs

made unter warranty. This applies also to replaced

and repaired parts. Any damage and defects extant

on purchase must be reported immediately after

unpacking the appliance, at the latest, two days after

the purchase date. Repairs made after the expiration

of the warranty period are subject to payment.

Service Great Britain

Tel.: 0871 5000 720

(0.10 GBP/Min.)

e-mail: kompernass@lidl.co.uk

IAN 96898

How do we get the lid off park side anti rust metal paint Submitted on 30-5-2021 at 15:17
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDFP 500 B2 - IAN 96898 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PDFP 500 B2 - IAN 96898

Parkside PDFP 500 B2 - IAN 96898 User Manual - French - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PDFP 500 B2 - IAN 96898 Manual

Product: