Manual Parkside PDEXS 150 A1 - IAN 96905 (page 8 of 81) (Danish, French, Swedish, Finnish)

595405

Zoom out

Zoom in

1/81

8 GB/IE

Safety instructions

which (due to work processes) may have accu-

mulated on the appliance. Avoid all skin con-

tact with these substances.

Note: If your skin comes into contact with

dangerous dusts, severe dermatitis may result.

If dust is produced or dispersed during the

maintenance work, it can be inhaled.

General safety rules

The operator always has to assess the particu-

lar risks involved in the respective applications

and has to carry out the connected safety

measures.

Multiple hazards. The safety instructions

must be read and understood before rigging,

operating, repairing, maintaining and exchang-

ing accessories on the sander and before

working near the machine. Failure to observe

this may result in severe physical injuries.

The sander or polisher should only be set up,

adjusted or used by qualified and trained

operators.

This sander or polisher must not be

modified. Modifications may reduce the

effectiveness of safety measures and increase

operator risks.

Do not allow these safety instructions

to get lost - hand them to the operator.

Never used damaged discs for the

sander or polisher.

The machines have to be regularly

inspected to check that the machines

are marked with the rated values and

markings clearly given in this docu-

ment. If necessary the employer/operator

has to contact the manufacturer to receive

replacement labels.

Risks due to projected parts

If the work-piece, one of the accessories or the

tool itself breaks, parts may be projected at

great speed.

When operating the sander or the

polisher, always wear impact resistant

eye protection. The level of required pro-

tection required should be assessed individually

for each application.

When working overhead, a safety

helmet must be worn.

In this case, the risk to other people must also

be assessed.

It must be ensured that the work-piece

is properly secured.

Hazards from entanglement

There is the danger of suffocation,

scalping or suffering cuts, when loosely

fitting clothing, jewellery, hair or

gloves are not kept away from the

machine and its accessories.

Operating hazards

When using the machine, the operator‘s

hands may be at risk, for example

from

cutting, abrasion and heat. Wear suitable

gloves to protect hands.

The operator and maintenance personnel must

be physically capable of managing the size,

weight and power of the machine.

Hold the machine correctly: be prepared

to counteract typical or sudden movements –

keep both hands ready.

Be sure your body is well balanced

and that you maintain a solid grip.

In the event of power failure release the start

or stop control.

Only use lubricants recommended by the

manufacturer (pneumatic oil).

To oil the appliance manually, remove the air

hose and fill 1 to 2 drops of a suitable pneu-

matic engine oil into the hose pipe end of the

machine.

Wear suitable protective

gloves. Otherwise there is the

danger of injuries due to cuts!

96905_par_Druckluft_Exzenterschleifer_content_GB_IE_FI_DK_BE.indd 8 30.04.14 15:46

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDEXS 150 A1 - IAN 96905 in the language / languages: Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 2,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PDEXS 150 A1 - IAN 96905

Parkside PDEXS 150 A1 - IAN 96905 User Manual - English, German, Dutch - 39 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PDEXS 150 A1 - IAN 96905 Manual

Product: