796079
24
Zoom out
Zoom in
Previous page
1/240
Next page
24
GB IE
Recharging the battery
Allow a hot battery to cool before
charging.
Charge the battery (5) when only
the red LED on the level indicator is
illuminated.
Charging
time (h.) PLGK12A2 PLGK12B2
PAPK12A3 1 0,5
PAPK12B3 2 1
PAPK12D1 2,5 1,1
1. Remove the battery (5) from the appli-
ance if necessary.
2. Insert the battery (5) in the charging
compartment of the battery charger
(17).
3. Plug the battery charger (17) into a
mains outlet.
4. Unplug the battery charger (17) from
the mains.
5. Pull the battery (5) out of the battery
charger (17).
Overview of the LED indicators on
the charger (17):
Green LED illuminated while the
rechargeable battery is not inserted:
Charger is ready
Green LED lights up: Battery is charged
Red LED lights up: Battery charging
Red LED ashes: Error
Choice of gear
Slide the gear selector (3) to 1 or 2,
corresponding to a low or high torque
selection.
1st gear ............................. 0-460 min-1
2nd gear .........................0-1750 min-1
A gear change may only be per-
formed in standstill mode!
Set the direction of
rotation
You can select the direction of rotation with
the direction switch (clockwise and anti-
clockwise direction) and secure the device
against accidental start up.
The arrow on the direction switch indicates
the working direction.
1. Wait for the device to shut-down.
2. Clockwise direction: Press
direction switch (4) to the left.
3. Anticlockwise direction: Press
direction switch (4) to the right.
4. Switch lock: Bring direction switch (4)
to neutral position.
The direction changed may only be
performed in standstill mode.
Torque setting
You can preset the maximum torque by
rotating the torque adjustment ring (2).
20+1 torque levels are provided.
1. Turn the adjusting ring (2) to select the
desired torque:
Step 1 --> lowest torque,
Step --> highest torque.
Screws: Steps 1 - 20
Drilling: Step
2. Start with a lower torque step and in-
crease according to requirement.
Torque adjustment should only be
performed in standstill mode.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PBSPA 12 B2 - IAN 379888 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PBSPA 12 B2 - IAN 379888 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info