Manual Parkside PBSG 95 C4 - IAN 315568 (page 18 of 65) (English, German, Dutch, French, Polish)

773439

Zoom out

Zoom in

1/65

18 GB/IE

22. Have your tool repaired by a

qualified person

This electric tool complies with the relevant

safety rules. Repairs should only be carried

out by qualiﬁed persons using original

spare parts, otherwise this may result in

considerable danger to the user.

Before use

Note: Remove all packaging material from the

product.

The operator should stand in front and stay

close to the power tool to prevent overreach.

In case of blockage, switch oﬀ the appli-

ance and unplug from the mains. Then clear

the jam.

Initial use

Grinding drills

Note: First rough grind severely damaged

drills with a grinding block.

Fully lower the brick. To do so, turn the

dial 1 all the way in the DOWN ▼

direction.

Insert the drill into the smallest drill guide 11

on the sharpener it will ﬁt. Please refer to

the markings (3 to 13) for the exact sizes

(Ø) of the respective drill guides 11 .

Set the ON/OFF switch 4 to position „I“

to switch on the product.

Turn the dial 1 in the UP ▲ direction until

you hear a grinding noise.

Note: The dial 1 controls the position of

the brick inside the grinding head, thus the

grinding pressure the brick applies to the

drill. The more the dial 1 is turned in the

UP ▲ direction, the greater the grinding

pressure. Be sure not to raise the brick too

high. The brick may otherwise get in contact

with the housing.

Loosely and quickly rotate the drill back

and forth about 10 times between the left

and right stop, applying light pressure

(small drills about 5 times).

Slightly pull out the drill, turn 180° around

its own axis and reinsert up to the brick.

If necessary, repeat the entire process until

both faces are sharp. Polish so the angle

() between the two cutting edges (b) is

118°. Both cutting edges (b) must have the

same angle to the drilling axle (a) and have

the same length for the drill to run centred

(see images below).

21 3

180

α =

118

(a)

(b)

Set the ON/OFF switch 4 to position „0“

to switch oﬀ the product.

Replacing the brick

RISK OF INJURY!

Always unplug from the mains before working

on the product. Replace a worn or damaged

brick (diminished, uneven grinding, broken brick).

You will need a phillips head screwdriver for this

step.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PBSG 95 C4 - IAN 315568 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1.67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PBSG 95 C4 - IAN 315568 Manual

Product: