779478
10
Zoom out
Zoom in
Previous page
1/114
Next page
GBIE 7
PBSD 900 A1
Fitting the dust collector
Push the dust collector onto the dust collector
connection from above.
Dismantling/removing the dust collector
Pull the dust collector off upwards.
Connecting a dust extraction adapter and
reducer for an external extraction appliance
Push the dust extraction adapter onto the
connection .
Push the reducer for the dust extraction
adapter into the adapter fitting .
Push the hose from a suitable dust extraction
appliance (e.g. a workshop vacuum cleaner)
onto the reducer for external vacuum
extraction.
Removing the dust extraction adapter and
reducer for an external extraction appliance
Pull off the hose of the dust extraction
appliance.
Remove the reducer for external dust
extraction.
Pull the dust extraction adapter upwards
offthe connection .
Working procedures
A light grinding pressure is sufficient
Apply minimal pressure when grinding. The belt
grinder's own weight is sufficient for a good
grinding result. In addition, working this way
helps to reduce the wear on the abrasive belt
and the surface of the workpiece will become
more smooth.
Removal and surface
The material removal rate and surface quality
are determined by the belt speed and grain
strength of the abrasive belt (see also the
section "Selecting speed and abrasive belt").
Grinding
Place the appliance on the workpiece when
switched on and work at a moderate feed rate.
Guide the grinder in parallel and overlapping
sanding motions over the workpiece. To avoid
unpleasant transverse grinding marks, always
sand in the direction of the grain.
After completing the task, lift the appliance from
the workpiece and then switch it off.
NOTE
Always hold the appliance firmly with two
hands while working.
Use
Switching on and off
While operating the belt grinder, you can choose
between instantaneous and continuous operation.
Switching to instantaneous operation
Press the ON/OFF switch .
Switching off instantaneous operation
Release the ON/OFF switch .
Switching to continuous operation
Press the ON/OFF switch , keep it pressed
in and then press the lock button .
Switching off continuous operation
Press the ON/OFF switch and then
release it.
Emptying the dust collector
The dust collector should be emptied after every
10 minutes of operation at least.
Pull the dust collector off (see section
"Attaching/removing a dust extraction unit")
Shake the dust collector over a rubbish
binto empty it.
Fit the dust collector back onto the
appliance.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PBSD 900 A1 - IAN 373104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PBSD 900 A1 - IAN 373104 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 4.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info