722838
20
Zoom out
Zoom in
Previous page
1/86
Next page
20
GB IE
tool may come into contact with
hidden wiring. Contact with a live
wire can also cause a charge in metal
parts of the appliance and result in an
electric shock.
j) Hold the device by the insulated
gripping surfaces when per-
forming work in which the cut-
ting tool may come into contact
with hidden wiring or its own
cord. If the screw were to come into
contact with a live electrical cable,
metal parts of the appliance could
also become live and cause an electric
shock.
7) RESIDUAL RISKS
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this electric
tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear
protection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic eld which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and the
manufacturer of their medical im-
plant before operating the machine.
Warning! Observe the safety
information in the operating
instructions for your Parkside
X 20 V Team series recharge-
able battery.
Only use chargers belonging
to the Parkside X 20 V TEAM
series to recharge the batte-

explosion.
Operation
Checking the battery charge
level
The battery’s (
12) charge level is indi-
cated by the charge state indicator (
11).
The LEDs indicate the battery’s charge
level, when the device is in operation.
To do this, press the softkey (
12a) of
the charge level indicator (
12).
red-yellow-green => Battery fully charged
red and yellow => Battery half charged
red => Battery needs
to be charged
Inserting / removing the
device’s battery pack
Inserting the battery pack:
Move the rotation direction
switch (
6) onto its middle
setting (lock). Slide the foot of
the device onto the battery pack
(
11) until it clicks into place.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PBSA 20-Li A1 - IAN 313557 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PBSA 20-Li A1 - IAN 313557 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info