Manual Parkside PBS 600 A1 - IAN 64748 (page 39 of 55) (English, Portuguese, Spanish)

595408

Zoom out

Zoom in

1/55

39 GB/MT

General safety advice for electrical power tools

the device if he or she is not familiar

with it or has not read the instructions

and advice. Electrical power tools are dan-

gerous when they are used by inexperienced

people.

e) Look after the device carefully. Check

that moving parts are working prop-

erly and move freely. Check for any

parts that are broken or damaged

enough to detrimentally affect the

functioning of the device. Have dam-

aged parts repaired before you use

the device. Many accidents have their origins

in poorly maintained electrical power tools.

f) Keep cutting tools clean and sharp.

Carefully maintained cutting tools with sharp

cutting edges are less likely to jam and are

easier to control.

g) Use the electrical power tool, accesso-

ries, inserted tools etc. in accordance

with these instructions and advice, and

the stipulations drawn up for this par-

ticular type of device. In doing this, take

into account the working conditions

and the task in hand. The use of electrical

power tools for purposes other than those in-

tended can lead to dangerous situations.

Safety advice for

belt sanders

Hold the device by the insulated han-

dle surfaces as the sanding belt could

strike the device’s own mains lead.

Damaging a live wire could result in the metal

parts of the device also becoming live and

could lead to an electric shock.

DANGER OF FIRE FROM FLYING SPARKS!

Sanding metal creates ﬂying sparks. For this

reason, always make sure that nobody is placed

in any danger and that there are no inﬂammable

materials near the working area.

J When undertaking prolonged sanding of wood,

and in particular when working on materials

that give rise to dusts that are hazardous to

health, the sander must be connected to a

suitable external dust extraction device.

J Ensure that there is adequate ventilation when

working on plastic, paint, varnish etc.

J The belt sander is designed for the dry sanding

of large surfaces of wood, plastic, metal and

plaster and painted surfaces. The device is to

be used for dry sanding only.

J Do not sand materials containing asbestos.

Asbestos is a known carcinogen.

POISONOUS DUSTS!

Sanding paints containing lead, some types of

wood and metal for example may give rise to

hazardous or poisonous dusts and represents a

risk to the health of the person operating the

device and to anyone near the work area.

Wear safety glasses and a dust

protection mask!

J Securely support the workpiece. Use clamps or

a vice to grip the workpiece ﬁrmly. This is much

safer than holding it with your hand.

J Never support yourself by placing your hands

near or in front of the device or the workpiece

surface. A slip can result in injury.

J If a dangerous situation arises, pull the mains

plug immediately out of the mains socket.

J Always work with the mains lead leading

away from the rear of the device.

J Avoid contact with the moving sanding belt.

J Do not work on moistened materials or damp

surfaces.

J Always switch on the device before placing it

against the workpiece. After sanding, lift the de-

vice from the workpiece before switching it oﬀ.

J When working always hold the device securely

with both hands (see Fig. E). Always keep prop-

er footing and balance.

J Switch the device oﬀ and allow it to come to

a complete standstill before you put it down.

J When taking a break from your work, before

carrying out any tasks on the device itself (e.g.

changing the sanding belt) and when you are

not using the device, always pull the mains

plug out of the mains socket.

64748_Bandschleifer 600 W_content_LB5.indd 39 01.04.11 14:20

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PBS 600 A1 - IAN 64748 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 3,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PBS 600 A1 - IAN 64748

Parkside PBS 600 A1 - IAN 64748 User Manual - German, Dutch, French, Italian - 45 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PBS 600 A1 - IAN 64748 Manual

Product: