Manual Parkside PBM 450 C2 - IAN 307054 (page 17 of 50) (English)

687487

Zoom out

Zoom in

1/50

Make sure that a second person

holds the device because there is a

danger of tipping backwards.

Do not tilt the equipment sideways

leak out and the engine could be

damaged.

• Always k eep the equipment clean. To

clean, use a toothbrush or cloth but no

corrosive cleaning agents or solvents.

Do not use water to clean the engine

as it could contaminate the fuel system.

• After mowing, remove plant remains

that are stuck to the equipment by using

a piece of wood or plastic. Clean the

vent holes (

11), ejection hole and

blade area especially. Do not use hard

or pointed objects, which could dam-

age the equipment.

• Oil the wheels from time to time.

• Before each use, check the lawnmower

for obvious defects such as loose, worn

or damaged parts. Check that all nuts

• Check covers and guards (

11,14,22) for damage and that they

are sitting correctly. Replace if neces-

sary.

Cleaning/Replacing the Air

Filter

Do not operate the equipment

and dirt will get into the engine and

result in damage to the machine.

1. Remove the spark plugs connec-

tor (

12) (see “Maintaining

the Spark Plug”).

2. Open t

3. Clean t

solution and let it dry. Put a few

drops of fresh engine oil into the

4. T

close it.

Maintaining the Spark Plug

A worn spark plug or a spark gap

that is too large will result in a re-

duction of engine performance.

1. Disconnect the spark plug con-

nector (12) from the spark plug

(13) by simultaneously pulling

and turning.

2. Unscrew the spark plug (13)

anticlockwise using the enclosed

spark plug wrench (

28).

3. Check the spark gap using a

feeler gauge (available from

specialist shops). The spark gap

must be at least 0.7-0.8 mm.

4. If necessary, adjust the gap by

carefully bending the ground

electrode on the spark plug.

5. Clean the spark plug with a wire

brush.

6. Insert the cleaned and adjusted

spark plug or replace a dam-

aged spark plug with a new one

(recommended torque 20Nm,

determined with a torque

wrench).

Changing the Engine Oil

Change the engine oil with the petrol

tank empty and the engine warm. Use a

suitable gasoline hand pump to empty

the tank. Alternatively, arrange the

refueling so that the remaining gasoline

is spent during operation.

GB IE NI

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PBM 450 C2 - IAN 307054 in the language / languages: English as an attachment in your email.

The manual is 2,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PBM 450 C2 - IAN 307054

Parkside PBM 450 C2 - IAN 307054 User Manual - German, Dutch, French - 96 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PBM 450 C2 - IAN 307054 Manual

Product: