Manual Parkside PBKS 53 A1 - IAN 315116 (page 98 of 120) (English, German, Dutch, French)

782041

Zoom out

Zoom in

1/120

7GB/IE

1. Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We hope you enjoy using the accessory.

NOTE:

According to the applicable product liability laws, the manu-

facturer of the accessory does not assume liability for damages

to the accessory or damages caused by the accessory that

occurs due to:

• Improper handling

• Non-compliance of the operating instructions

• Repairs by third parties, not authorized service technicians

• Application other than speciﬁed

Please observe the following:

Read through the complete text in the operating instructions be-

fore assembling and using the accessory.

The operating instructions are intended to help the user to be-

come familiar with the accessory and take advantage of the ap-

plication possibilities in accordance with the recommendations.

The operating instructions contain important information on how

to use the accessory safely, professionally and economically,

how to avoid danger, costly repairs, reduce downtimes and how

to increase reliability and service life of the accessories.

In addition to the safety regulations in the operating instruc-

tions, you have to meet the applicable regulations that apply

for the use of the accessory in your country.

Keep the operating instructions package with the accessory at

all times and store it in a plastic cover to protect it from dirt and

moisture. Read the instruction manual each time before using

the accessory and carefully follow its information.

In addition to the safety instructions contained in this operating

manual and the speciﬁc regulations of your country, the techni-

cal rules generally accepted for the use of accessories of the

same type must be observed.

We accept no liability for damage or accidents which arise

due to non-observance of these instructions and the safety in-

formation.

2. Scope of delivery

• 1 pair of safety goggles

• 1 set of ear muﬀs

• Translation of original operating manual

3. Intended use

The accessory is allowed to be used only for its prescribed

purpose. Any other use is deemed to be a case of misuse. The

user/operator and not the manufacturer will be liable for any

damage or injuries of any kind resulting from such misuse.

An element of the intended use is also the observance of the

safety instructions as well as the assembly instructions and op-

erating information in the operating manual.

In addition, the applicable accident prevention regulations

must be strictly observed.

Other general occupational health and safety-related rules and

regulations must be observed.

The liability of the manufacturer and resulting damages are ex-

cluded in the event of modiﬁcations of the accessory.

Please note that the accessory has not been designed for use

in commercial, trade or industrial applications. Our warranty

will be voided if the accessory is used in commercial, trade or

industrial businesses or for equivalent purposes.

Safety goggles

The safety goggles are designed for eye protection.

The product complies with EN 166, safety class F and optical

grade 1.

The protective glass is clear. Safety class F means that the prod-

uct has high resistance to impacts from small particles with low

energy and a high speed of 45 m/s.

Ear muﬀs

The ear muﬀs protect the wearer against noise and distracting

sounds.

The ear muﬀs cover a size range from “medium” to “large”

and ﬁt most users.

4. Safety instructions

In these operating instructions, we have used the following sym-

bol to mark sections concerning your safety: m.

m WARNING! Read all safety warnings and all

instructions.

Save all warnings and instructions for future

reference.

Safety goggles

a) The safety goggles and packaging material are

not toys. Keep them out of the hands of children.

b) Never leave the packaging material unattend-

ed. It could be a danger if children play with it.

c) Protect the safety goggles from extreme tem-

peratures, direct sunlight, shocks, high humid-

ity, wetness, ﬂammable gases, vapours and

solvents.

d) Treat the safety goggles carefully. They can be

damaged by bumps, impacts or a fall from a low height.

e) Note that the safety goggles can transmit the

energy of impacts from high velocity particles

(when worn over corrective glasses) and thus

represent a danger to the user.

f) Note that some materials may trigger allergic

reactions upon contact with sensitive skin.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PBKS 53 A1 - IAN 315116 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PBKS 53 A1 - IAN 315116 Manual

Product: