782041

Parkside PBKS 53 A1 - IAN 315116 Manual

33
Zoom out
Zoom in
Previous page
1/120
Next page
29GB/IE
• Use the flat-head screwdriver (31) to turn the chain-tensioner
screw (21) clockwise until the lower part of the saw chain
(17) slides into the guide rail (16). The saw chain (17) must
lie against the underside of the rail. When the chain brake is
released, you should be able to pull the saw chain (17) over
the guide rail (16) by hand.
NOTE
A new saw chain (17) stretches and must be tightened more
regularly.
• Tighten the two locking nuts (20) with the spark plug wrench
(31).
Sharpening and caring for the saw chain
m WARNING
Risk of injury!
Always wear protective gloves when handling the saw chain
(17). There is a danger of injury from the sharp cutting teeth!
NOTE
A properly maintained and sharpened saw chain reduces the
amount of bodily effort and level of wear and produces a bet-
ter result.
Clean, maintain and sharpen the saw chain regularly.
Check the saw chain regularly for cracks and damaged rivets.
A grinder can be attached to the grinder support (18) for a
secure grip during grinding.
Use only special Ø 4.8 mm (3/16”) round files for saw chains
for the supplied saw chain.
You will find detailed information on sharpening in a sharpen-
ing set, e.g. an Oregon set.
Alternatively, you can use an electrical saw chain sharpening
device and follow the instructions of the manufacturer.
If you have any doubts about carrying out the work, the saw
chain should be replaced.
If necessary, have the sharpening of the saw chain (17) carried
out by a specialist workshop.
• Required parts (not supplied):
-Ø 4.8 mm (3/16”) round file for saw chains
-Flat file
-Depth limit setter
• File using forwards movements only to remove material.
• File at an angle of around 25° at an inclination of 10° to
the guide rail (16).
• Check the clearance of the depth limiter with a depth limit
setter.
• The correct clearance of the depth limiter should be 0.6 mm
(0.024”).
Maintenance intervals
The figures given here are based on normal operating conditions. In the event of more difficult conditions, such as strong dust generation and
longer daily working hours, the given intervals are to be reduced correspondingly.
Appliance part Action Before start-
ing work Weekly In the event of
an error
In the event of
damage As required
Chain lubrication Checking X
Saw chain (17) Check and note
sharpness X
Check chain
tension X
Sharpen X
Guide rail (16) Check (wear,
damage) X
Cleaning X X
Replace X X
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PBKS 53 A1 - IAN 315116 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PBKS 53 A1 - IAN 315116 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info