Manual Parkside PAT 4 C4 - IAN 322166 (page 42 of 165) (English, German, Dutch, French, Polish)

779570

Zoom out

Zoom in

1/165

42 GB/IE

Adding nails

Set the On / Oﬀ switch 8 to the “0“ position before working on

the product.

Turn the product over.

Squeeze the release button 3a (see Fig. B).

Pull back on the pusher 3 (see Fig. B)

Follow icon shown on pusher 3 (see Fig. C) and add nails to the

magazine 4 (see Fig. C)

After adding nails, slide the pusher 3 in again until the magazine

4 is fully closed, (see Fig C).

Release the release button 3a . It must click and lock into place for

the magazine 4 to be closed correctly.

Note: Use the window on the ﬁll indicator 5 to see if the

magazine 4 is empty.

Functions

Stapling & Nailing

Set the On / Oﬀ switch 8 to the “I“ position to switch the product on.

Press the safety contact 6 into the work piece.

Squeeze the trigger 1 whilst holding the product against the work

piece to drive a staple / nail into it.

Set the On / Oﬀ switch 8 to the “0“ position to switch the

product oﬀ.

Note: Hold tool ﬁrmly and press on work surface before ﬁring to

ensure the complete penetration of the staple / nail.

Clearing Jammed Staples

If a staple is jammed, do not squeeze the trigger 1.

It may otherwise accidentally be triggered after removing the staple.

Note: Set the On / Oﬀ switch 8 to “0“ position prior to clearing the

jammed staple.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAT 4 C4 - IAN 322166 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2.09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PAT 4 C4 - IAN 322166 Manual

Product: