679268
18
Zoom out
Zoom in
Previous page
1/89
Next page
PASSK 20-Li A1
14 
GB
IE
CORDLESS VEHICLE IMPACT
WRENCH PASSK 20-Li A1
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
This appliance is intended for screwing in and
unscrewing screws as well as for tightening and
loosening nuts. The appliance has a clockwise/
anticlockwise rotation, a 1/2" external square
drive bit holder and an LED working light. The light
on this appliance is intended to illuminate the im-
mediate working area of the appliance. The rotary
impact function of the appliance enables the power
of the motor to be converted into uniform rotary
impacts. The impact mechanism comes into effect
during tightening and loosening.
The appliance is designed for use by adults. Young
people under 16 years of age may only use the
appliance under supervision. The manufacturer ac-
cepts no liability for damages caused by improper
use or incorrect operation of the appliance.
Use this product only as described and for the
areas of applications specified. The appliance is
not intended for commercial use. Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse.
Features
Tool holder
Rotation direction switch/lock
Belt clip
Battery charge level button
Battery display LED
Battery pack*
Release button for the battery pack
LED work light
Torque preselection button
ON/OFF switch / speed control
Sockets (17/19/21/23 mm)
High-speed charger*
Red charge control LED
Green charge control LED
Package contents
1 cordless vehicle impact wrench
PASSK 20-Li A1
4 sockets (17/19/21/23 mm)
1 belt clip
1 carrying case
1 set of operating instructions
Technical data
Cordless vehicle impact wrench:
PASSK 20-Li A1
Rated voltage: 20 V
(DC)
Idle speed: 0–2300 rpm
Rated stroke rate: 0–3000 rpm
Max. torque: 400 Nm
Torque selectable at
5 levels: 100/150/200/
300/400 Nm
Tool holder: 1/2"
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PASSK 20-Li A1 - IAN 305077 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PASSK 20-Li A1 - IAN 305077 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info