576742

Parkside PASS 3.6 B2 - IAN 96266 Manual

21
Zoom out
Zoom in
Previous page
1/28
Next page
18
PASS 3.6 B2
GB
CORDLESS SCREWDRIVER
PASS 3.6 B2
Introduction
Congratulations on the purchase of your
new appliance. You have selected a high-
quality product. The operating instructions
are part of this product. They contain important
information on safety, use and disposal. Before
using the product, familiarise yourself with all
operating and safety instructions. Use this product
only as described and only for the specifi ed areas
of application. Please also pass these operating
instructions on to any future owner(s).
Proper use
This appliance is designed for screwing into wood,
plastic and metal. Use the appliance only as described
and only for the areas of application specifi ed.
Any other uses or modifi cations to the appliance
are deemed to be improper usage and may result
in serious physical injury. Not for commercial use.
Features
ON/OFF switch
Rotation direction switch/safety lock-out
LED
Tool holder
Locking collar
Torque setting
Battery level display
Locking button
Charging socket (appliance)
Charger
Package contents
1 cordless screwdriver PASS 3.6 B2
1 charger PASS 3.6 B2-1
1 carrying case
24 bits x 25 mm
2 bits x 50 mm
1 bit extension
1 operating instructions
Technical details
Cordless screwdriver: PASS 3.6 B2
Rated voltage: 3.6 V
Battery (integrated): LITHIUM-ion
Battery capacity: 1500 mAh
Nominal idle speed: n
0
= 200 min
-1
Torque: max. 4.0 Nm
Tool holder: 6.35 mm (¼")
Charger: PASS 3.6 B2-1
INPUT:
Rated voltage: 230 - 240 V∼ 50/60 Hz
Rated current: 200 mA
OUTPUT:
Rated voltage: 5.5 V
Rated current: 600 mA
Charging time: approx. 3 hours
Protection class: II /
Noise and vibration data:
Noise measurement determined in accordance
with EN 60745 The A-rated noise level of the
power tool is typically:
Sound pressure level: 57 dB(A)
Sound power level: 68 dB(A)
Uncertainty K: 3 dB
Vibration values (vector total of three directions)
determined in accordance with EN 60745
Screws: Vibration emission value ah = 0.393 m/s
2
Uncertainty K = 1.5 m/s
2
The vibration level specifi ed in these instructions has
been measured in accordance with the standardised
measuring procedure specifi ed in EN 60745 and
can be used to make equipment comparisons.
The specifi ed vibration emission value can also
be used to make an initial exposure estimate. The
vibration level varies in accordance with the use of
the power tool and may be higher than the value
specifi ed in these instructions in some cases. It is
easy to underestimate the vibration load if the
electrical power tool is used regularly in a certain
manner.
IB_96266_PASS3.6B2_LB1.indb 18IB_96266_PASS3.6B2_LB1.indb 18 23.12.13 17:0423.12.13 17:04
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PASS 3.6 B2 - IAN 96266 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PASS 3.6 B2 - IAN 96266 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PASS 3.6 B2 - IAN 96266

Parkside PASS 3.6 B2 - IAN 96266 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info