595314

Parkside PAR 10.8 A1 - IAN 110045 Manual

29
Zoom out
Zoom in
Previous page
1/33
Next page
26
PAR 10.8 A1
GB
Appliance-specific safety guidelines
for cordless ratchets
■ Hold the appliance using the insulated handle
areas if you are carry out any work during
which the attached tool could contact hidden
power cables. Contact with a live cable may
also cause metal parts of the appliance to
become live and may result in an electric shock.
■ Secure the workpiece. A workpiece securely
held by a clamping device or vice is much safer
than one held in your hand.
■ Hold the power tool firmly. High reaction
moments can occur for short periods while
tightening and loosening bolts.
■ Switch the power off immediately if the tool
being used blocks. Always be prepared for
high reaction moments which can cause kickback.
■ While maintenance the appliance, always
remove the battery pack of the appliance.
This prevents the power tool from starting up
unintentionally.
■ CAUTION, POWER CABLES! DANGER!
Ensure that you are not likely to contact power,
gas or water supply lines when you are working
with the power tool.
Original accessories/auxiliary
equipment
■ Use only the additional equipment and acces-
sories specified in the operating instructions.
Using attachments or accessory tools other than
those recommended in the operating instructions
can lead to a risk of injury.
Before first use
Removing/charging/inserting the
battery pack
NOTE
►
The battery is supplied partially charged.
Before first use, charge the battery in the
charger for at least 1 hour. This guarantees
full battery power. You can charge the lithium-
ion battery at any time without shortening its
service life. Interrupting the charging process
does not damage the battery.
CAUTION!
► Always unplug the appliance before you
remove the battery pack from or connect the
battery pack to the charger.
■ Never charge the battery pack when the
ambient temperature is below 10°C or above
40°C.
♦ To remove the battery pack, press the release
button
and pull the battery pack out of
the appliance.
♦ Insert the battery pack
into the high-speed
charger
.
♦ Insert the mains plug into the mains power
socket. The control LED
will light up red.
♦ The green charging status indicator LED
shows
you when the charging process is complete and
the battery pack is ready for operation.
♦ Insert the battery pack
back into the appliance.
■ Never recharge a battery pack again immediately
after rapid charging. This could overcharge the
battery pack, thus reducing the lifespan of the
battery and charger.
♦ You should always switch the high-speed charger
off for at least 15 minutes between succes-
sive charging processes. Simply disconnect the
power plug from the mains power socket.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PAR 10.8 A1 - IAN 110045 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAR 10.8 A1 - IAN 110045 in the language / languages: French as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PAR 10.8 A1 - IAN 110045

Parkside PAR 10.8 A1 - IAN 110045 User Manual - English, German, Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info