595314

Parkside PAR 10.8 A1 - IAN 110045 Manual

25
Zoom out
Zoom in
Previous page
1/33
Next page
22
PAR 10.8 A1
GB
CORDLESS RATCHET
PAR 10.8 A1
Introduction
Congratulations on the purchase of your
new appliance. You have selected a high
quality product. The operating instructions
are part of this product. They contain
important information on safety, usage
and disposal. Before using the product, familiarise
yourself with all handling and safety instructions.
Use the product only as described and for the range
of applications specified. Hand over all documents
to any future owner(s).
Intended use
The appliance is intended for tightening and loos-
ening hexagonal bolts and nuts. Use this product
only as described and for the areas of applications
specified. The appliance is not meant for commercial
use. Any other usage of or modification to the
appliance is deemed to be improper and carries a
significant risk of accidents. The manufacturer accepts
no responsibility for damage(s) attributable to misuse.
Features
Rotational direction switch
Battery status indicator
Release buttons
Battery pack
ON/OFF switch
3/8" driveshaft
High-speed charger
Charging status display LED
Control LED
3/8" to 1/4" adapter sleeve
3/8" to hexagon bit holder adapter sleeve
Spanner sockets (10, 12, 13, 14, 15, 17 mm)
Package contents
1 PAR 10.8 A1 cordless ratchet
1 PAR 10.8 A1-1 battery pack
1 PAR 10.8 A1-2 high-speed battery charger
1 3/8" to 1/4" adapter sleeve
1 3/8" to hexagon bit holder adapter sleeve
6 Spanner sockets (10, 12, 13, 14, 15, 17 mm)
1 carrying case
1 operating instructions
Technical data
Cordless ratchet: PAR 10.8 A1
Rated voltage: 10.8 V
Idle speed: n
0
220 rpm
Max. torque: 45 Nm
Square drive: 3/8"
Battery: PAR 10.8 A1-1
Type: LITHIUM ION
Rated voltage: 10.8 V
Capacity: 1.5 Ah
High-speed battery charger: PAR 10.8 A1-2
INPUT:
Rated voltage: 230–240 V
~
, 50 Hz
Power consumption: 32 W
OUTPUT:
Rated voltage: 12.6 V
Charging current: 1.8 A
Charging time: approx. 60 min
Fuse (internal): 2 A
T2A
Protection class: II /
Noise and vibration data:
Measured values for noise determined in accordance
with EN 60745. The A-rated noise level of the
power tool is typically as follows:
Sound pressure level: 82.37 dB(A)
Sound power level: 93.37 dB(A)
Uncertainty K: 3 dB
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PAR 10.8 A1 - IAN 110045 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAR 10.8 A1 - IAN 110045 in the language / languages: French as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PAR 10.8 A1 - IAN 110045

Parkside PAR 10.8 A1 - IAN 110045 User Manual - English, German, Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info