722847
29
Zoom out
Zoom in
Previous page
1/105
Next page
PAMFW 20-Li A1
GB
IE
 25
Fitting the sanding sheet onto the
sanding plate
Place the sanding sheet centrally on the
sanding plate .
Changing tools
NOTE
If you plan to use the dust extraction unit, it
must be connected before fitting or changing
the tool (see. section "Connecting a dust
extraction unit").
WARNING! RISK OF INJURY!
Always remove the battery before working on
the power tool.
If necessary, remove an already fitted tool.
To do this, raise the tool release lever
.
Fit the tool (e.g. the plunge saw blade
) onto
the tool holder.
NOTE
You can fit the tools in any snap position on
the tool holder.
Lock the tool into place by pushing the tool
release lever
back down again.
Check that the tool is fitted firmly. Incorrectly
or insecurely fitted tools can come loose during
use and cause you an injury.
Use
Switching on and off
Switching on:
Push the ON/OFF switch
forwards to switch
the appliance on.
The LED work light
lights up when the appli-
ance is switched on to light up the working area
in low light conditions.
NOTE
The LED work light
can only be used when
the dust extraction unit is not fitted.
Switching off:
Push the ON/OFF switch
backwards to
switch the appliance off.
Selecting oscillation speed
Use the speed adjustment wheel to set the
required oscillation speed.
Level 1: low speed
Level 6: high speed
NOTE
The required speed depends on the material
being worked and on the working conditions
and can be determined through practical
tests.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PAMFW 20-Li A1 - IAN 315572 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAMFW 20-Li A1 - IAN 315572 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info