722794

Parkside PALP 20-Li B2 - IAN 317171-1904 Manual

22
Zoom out
Zoom in
Previous page
1/128
Next page
22
GB IE
Technical data
Cordless air pump ................PALP 20-Li B2
Nominal voltage U ..................... 20 V
Air volume ................................70 m
3
/h
Sound pressure level
(L
pA
) ................. 72.27 dB(A), K
pA
= 3 dB
Sound power level (L
WA
)
measured ........ 83.27 dB(A), K
WA
= 3 dB
Vibration (a
h
) ........1.63 m/s
2
, K= 1.5 m/s
Cordless compressor ..............PAK 20-Li B2
Nominal voltage U ...................... 20 V
Max. operating pressure 0.70 MPa (7 bar)
Sound pressure level
(L
pA
) ................... 75.2 dB(A), K
pA
= 3 dB
Sound power level (L
WA
)
measured ..... 85.3 dB(A), K
WA
= 2.47 dB
Vibration (a
h
) .......1.75 m/s
2
, K= 1.5 m/s
2
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can only be operated with the
following rechargeable batteries:
PAP 20 A1, PAP 20 A2, PAP 20 A3.
This type of battery may be charged
with the following chargers: PLG20A1,
PLG20A3, PDSLG20A1.
Battery (Li-Ion) ...............PAP 20 A1
Battery cells ......................................... 5
Nominal voltage ......................... 20 V
Capacity ..................................... 2.0 Ah
Energy ..................................... 40 Wh
Charging time ...................... approx. 1 h
Temperature...........................max. 50°C
Charging process ...................4 - 40°C
Operation .......................... -20 - 50°C
Storage .................................0 - 45°C
Charger .............................. PLG 20 A1
Nominal consumption .....................65 W
Voltage input ............ 230-240 V~, 50 Hz
Voltage output ......................... 21.5 V
Voltage current ..............................2.4 A
Safety class ......................................
II
Miniature fuse ............................. T3.15A
Attention! This charger can only
recharge the following batteries:
PAP20A1, PAP20A2, PAP20A3.
Levels of noise and vibration were deter-
mined according to the standards and re-
gulations in the declaration of conformity.
The specifi ed total vibration value and the
stated noise emission value have been
measured according to a standardised test
method and can be used to compare one
power tool with another.
The specifi ed total vibration value and the
stated specifi ed noise emission value can
also be used for a provisional assessment
of the load.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PALP 20-Li B2 - IAN 317171-1904 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PALP 20-Li B2 - IAN 317171-1904 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info