722827
30
Zoom out
Zoom in
Previous page
1/214
Next page
30
GB IE
Valve adapter
Valve adapter
a:
For all standard valves
with an internal diame-
ter from 8mm.
Valve adapter
b:
For infl atable items with
a screw-on valve. Defl a-
tion is only possible with
the valve unscrewed
and with adapter b.
Valve adapter
c:
For infl atable items with
an exhaust valve.
Valve adapter
d, f:
For infl ating air mattres-
ses and the like.
Valve adapter
e:
For infl ating water balls
and the like.
Ball needle:: For infl ating different
balls.
Valve adapter
for Presta val-
ves:
For infl ating bicycle
tyres.
Valve adapter
for Dunlop/
Woods valves:
For infl ating bicycle
tyres.
Working instructions
Changing the pressure
setting
(only the cordless compres-
sor)
1. Switch the display (4) on the cordless
compressor on (see “Switching on/
off”).
2. Press the “+” button (7) on the display
(4) to increase the pressure setting.
Press and hold the “+” button (7) for
approx. 3 seconds. The numbers on
the display (4) begin to light up. You
can now increase the preset value by
pressing the “+” button (7). The number
is increased by 1 each time you press.
3. To decrease the preset value, proceed
in the same way but using the “-” but-
ton (5).
By briefl y pressing the On/off
button (6) on the display, you can
switch the display of the pressu-
re unit between “bar” and “psi”
(pounds per square inch). The
display (4) has to be on (see “Swit-
ching on/off”).
Cleaning and Servicing
Switch off the device and
remove the battery before
carrying out any maintenan-
ce work.
You should have any repair and
maintenance work that is not de-
scribed in these instructions carried
out by our Service Centre. Only use
original parts.
Perform the following maintenance and cle-
aning work regularly. This will guarantee
long and reliable use.
Cleaning
The device must not be
sprayed with water or placed
in water. Otherwise there is
a risk of electric shock.
Do not use any cleaning agents or
solvents. This could damage the
device irreparably. Chemical subs-
tances may attack the plastic parts
of the device.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PALP 20-Li B2 - IAN 306850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PALP 20-Li B2 - IAN 306850 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info