722857
27
Zoom out
Zoom in
Previous page
1/105
Next page
PAK 20-Li A1 / PALP 20-Li A1
GB
IE
 23
Operating the cordless
compressor PAK 20-Li A1
This appliance is not designed for continuous
operation. The appliance may be used for a maxi-
mum of 10 minutes continuous operation. If the
appliance overheats, remove the battery pack
.
Allow the appliance to cool down completely and
then try using it again.
Display indicator
Press the ON/OFF switch on the display
or press the ON/OFF switch to switch on
the display indicator
.
The last set pressure is displayed for 2 seconds.
After two seconds, the current pressure of the
connected item is shown.
NOTE
If the compressed air hose is not connected
to a suitable item, the display indicator
shows "0".
If the display indicator is switched on, you
can switch between "bar" and "psi" by pressing
the ON/OFF button .
To switch off the display indicator , press the
ON/OFF button for 3 seconds.
NOTE
The compressor will not work if the display
indicator is switched off.
Setting the pressure
Hold down the "+" or "–" button until the
display flashes.
Press the "+" or "–" button to set the
desired pressure.
Once you see the desired pressure on the
display indicator , do not press any button
for about 3 seconds.
The desired pressure is now set.
NOTE
The display indicator (and thus the com-
pressor) switches off after around three
minutes of inactivity.
TIP
If you press and hold the "+" or "–"
button, the pressure changes quickly.
Initial operation
Loosen the cap nut (do not unscrew it com-
pletely!), twist in the compressed air hose
threaded connection
22a
and retighten the
cap nut .
Select the desired pressure.
Insert one of the supplied adapters ( , , ,
, , ) tightly onto the compressed air hose
adapter .
Connect the adapter , , , , or
to the object to be inflated.
Press the ON/OFF switch .
The compressor switches off automatically when
you reach the preset pressure.
Pull the adapter , , , , or out of
the now inflated item.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PALP 20-Li A1 - IAN 300633 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PALP 20-Li A1 - IAN 300633 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info