722848
22
Zoom out
Zoom in
Previous page
1/118
Next page
PALA 20-Li A1
GB
IE
 19
Technical data
Cordless extendable lopper: PALA 20-Li A1
Rated voltage: 20 V
(DC)
Max. cutting width: max. Ø 32 mm
Telescopic length: from 160 cm to 200 cm
Weight (with battery): approx. 3.5 kg
Battery: PAP 20 A1*
Type: LITHIUM ION
Rated voltage: 20 V
(DC)
Capacity: 2 Ah
Cells: 5
Quick battery charger: PLG 20 A1*
INPUT:
Rated voltage: 230–240 V
~
, 50 Hz
(AC)
Rated power
consumption: 65 W
Fuse (internal): 3.15 A
T3.15A
OUTPUT:
Rated voltage: 21.5 V
(DC)
Rated current: 2.4 A
Charging time: approx. 60 min
Protection class: II / (double insulation)
*BATTERY AND CHARGER ARE NOT INCLUDE
Noise emission values:
Noise measurement value determined in accord-
ance with EN ISO 62841. The A-rated noise level
of the power tool at the working location is typical-
ly as follows:
Sound pressure level: L
pA
= 88 dB (A)
Uncertainty: K
pA
= 3 dB
Sound power level: L
WA
= 106 dB (A)
Uncertainty: K
WA
= 3 dB
Wear ear muffs!
Total vibration values (for each handle) determined
according to EN 62841:
Vibration: < 2.5 m/s
2
Uncertainty K = 1.5 m/s
2
WARNING!
The sound pressure level must be reduced,
depending on the use and the activities to be
carried out, to such an extent that the operator's
health is not adversely affected. The sound
pressure level at the workplace can exceed
80 dB (A). In this case, sound insulation
measures are required for the operator (e.g.
wearing ear muffs).
You can reduce the vibration risk, for example,
the risk of Raynaud's phenomenon, by taking
regular breaks during which you rub your
hands together.
NOTE
The stated total vibration value and the stated
noise emission value have been measured
according to a standardised test procedure
and can be used to compare one power tool
with another.
The stated total vibration value and the stated
noise emission value(s) can also be used for
a preliminary estimation of the load.
WARNING!
Depending on the manner in which the power
tool is being used, and in particular the kind
of workpiece that is being worked, the vibra-
tion and noise emission values can deviate
from the values given in these instructions
during actual use of the power tool.
Try to keep the exposure to vibrations and
noise as low as possible. Measures to reduce
the vibration load are, e.g. wearing gloves
and limiting the working time. Wherein all
states of operation must be included (e.g.
times when the power tool is switched off and
times when the power tool is switched on but
running without load).
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PALA 20-Li A1 - IAN 318953 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PALA 20-Li A1 - IAN 318953 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info