Manual Parkside PAHS 12 A1 - IAN 88933 (page 40 of 44) (English, German, Dutch, French)

663574

Zoom out

Zoom in

1/44

40 GB

Start-up / Maintenance and cleaning / Service centreGeneral safety advice for electrical power tools / Before Initial Use / Start-up

Children should be supervised to ensure that

they do not play with the device.

Single use, non-rechargeable batteries must

never be recharged.

Before Initial Use

Removing / charging /

inserting the battery pack

Note: The battery packed is delivered partly

charged.

Charge the battery pack with the included charger,

ideally for a minimum of 3 hours. This will ensure

the battery delivers full power. Li-Ion batteries can

be charged at any time without reducing the life. In-

terrupting the charging process does not damage

the rechargeable battery.

1. To remove the rechargeable battery pack

press the release buttons

and slide the bat-

tery pack

out of the unit.

2. Insert the battery pack

into the charger

3. Insert the mains plug into the mains socket. The

charge indicator

will light up red.

4. The green charge indicator

shows charging

is complete and the battery pack

is ready

for use.

5. Slide the battery pack

into the unit.

Checking the battery charge

The battery LED

indicates the status or remain-

ing charge as:

RED/ YELLOW/ GREEN = maximum charge/ power

RED/ YELLOW = medium charge/ power

RED = low charge – recharge battery

Start-up

Note! Always switch the hand grinder on before

applying it to the material, then apply.

Switching the unit on:

Press the ON / OFF switch

Switching the unit off:

Press the ON / OFF switch

Vacuum dust extraction

DANGER OF FIRE! There is

the danger of ﬁre when working with electrical

devices that have a dust box or can be connected

to a vacuum cleaner. Under certain conditions the

wood dust in the dust extraction bag (or in the

vacuum‘s dust bag) may ignite, e.g. as a result of

ﬂying sparks generated when abrading metals or

metal objects left in wood. This can happen par-

ticularly if the wood dust is mixed with paint resi-

due or other chemicals and the abraded particles

are hot from prolonged abrasion. Therefore you

must empty the device’s dust collection box and the

vacuum cleaner’s dust bag before taking a break

or stopping work and always avoid overheating of

the abraded particles and the device.

Wear a dust mask!

Dust box for internal

vacuum extraction

Mounting:

Slide the dust box for self-generated dust ext-

raction

up to the stop on the hand sander.

Removal:

Press the release button

of the dust extraction

box for internal vacuum extraction

and

withdraw it towards the rear of the device.

Note: Empty the dust collector in good time in or-

der to ensure the optimum removal of

dust by

suction.

To do so, remove the dust box

from the de-

vice as described above. Open the dust box

by pulling on the tab

and remove the cover.

Now tap both parts to thoroughly clean them.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAHS 12 A1 - IAN 88933 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PAHS 12 A1 - IAN 88933 Manual

Product: