764049
10
Zoom out
Zoom in
Previous page
1/104
Next page
10
GB IE NI
switch does not turn it on and
off. Any power tool that cannot be
controlled with the switch is dangerous
and must be repaired.
c) Remove the plug from the
wall socket and/or remove the
rechargeable battery before
you change the settings of the
device, change accessory parts
or put away the device. Such pre-
ventive safety measures reduce the risk
of starting the power tool accidentaIly.
d) Store idle power tools out of
the reach of children and do not
allow persons unfamiliar with
the power tool or these instruc-
tions to operate the power tool.
Power tools are dangerous in the
hands of untrained users.
e) Maintain power tools. Check
for misalignment or binding
of moving parts, breakage of
parts and any other condition
that may affect the power tool’s
operation. If damaged, have
the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, tak-
ing into account the working
conditions and the work to be
performed. Use of the power tool
for operations different from those
intended could result in a hazardous
situation.
5) Use and treatment of the bat-
tery-powered tool
a) Only recharge batteries using chargers
recommended by the manufacturer. If
a charger that has been designed for
a particular type of battery is used to
charge other batteries, there is a risk of
re.
b) Only use the battery that is intended in
an electric tool. The use of other batte-
ries may create a re hazard and lead
to injury.
c) When not in use, keep batteries away
from paper clips, coins, keys, nails,
screws or other small metal objects that
could cause the contacts to be bridged.
A short circuit between battery contacts
can result in burns or a re.
d) When misused, uid may leak from the
battery. Avoid any contact with it. On
accidental contact, wash in running
water. If the uid comes into contact
with the eyes, seek medical assistance
also. Leaking battery uid can cause
skin irritation or burns.
6) Service
a) Have your power tool serviced
by a qualied repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
Safety information for
chainsaws
When in operation, keep all
body parts away from the saw
chain. Before you start the saw,
ensure that the saw chain is not
touching anything. When using a
chainsaw, losing concentration for just
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PAHE 20-Li B2 - IAN 354671 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAHE 20-Li B2 - IAN 354671 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info