Manual Parkside PAHE 20-Li A1 - IAN 315261 (page 31 of 141) (English, German, Dutch, French, Polish)

722849

Zoom out

Zoom in

1/141

│

27 ■

PAHE 20-Li A1

■ Never remove the plug from the power supply

by pulling on the power cable. Always pull the

power plug itself. Do not drag or carry the

appliance using the power cable. Keep power

cable away from heat, oil, sharp edges or

moving parts.

■ Remove the battery pack from the appliance

after completion of work or during cleaning

and maintenance.

■ Avoid unintentional starting of the appliance.

■ Appliances with defective switches must be re-

paired immediately to avoid damage or injuries.

■ Store the appliance outside of the reach of chil-

dren. Only those who are fully acquainted with

these operating instructions and the appliance

itself may operate the appliance.

■ Maintain power tools carefully. Check for mis-

alignment or binding of moving parts, breakage

of parts and any other condition that may aﬀect

the power tool’s operation. If damaged, have

the power tool repaired before use. Many

accidents are caused by poorly maintained

power tools.

■ Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

■ Therefore, have the appliance checked by quali-

ﬁed specialists. Use only the replacement parts

recommended by the manufacturer.

Precautions against kickback

CAUTION KICKBACK!

► Be aware of the danger of kickback when

working with the appliance. There is a risk

of personal injury.

You can avoid kickbacks by being careful

and using the correct sawing technique.

■ Contact with the tip of the rail can, in some

cases, lead to an unexpected rearwards

reaction resulting in the guide rail

ﬂying

upwards towards the operator (see Fig. A).

Fig. A

■ Kickbacks can occur if the tip of the guide rail

touches an object or if the wood bends and the

saw chain gets caught in the cut (see Fig. B).

Fig. B

■ If the saw chain jams in the upper edge of

the guide rail , the rail can kick back violently

towards the operator.

■ Any such reaction can lead to you losing con-

trol over the saw and possibly injuring yourself.

Do not rely solely on the chainsaw's built-in

safety devices. As the user of a chainsaw, you

can take a number of measures to avoid ac-

cidents and injury. A kickback is caused by

incorrect use or misuse of the power tool. It can

be avoided by taking proper precautions as

given below:

■ Hold the saw ﬁrmly with both hands, with

your thumb and ﬁnger around the handles of

the chainsaw. Hold your body and arms in a

position in which you can withstand kickback

forces. If suitable measures are taken, the op-

erator can control the recoil forces. Never

let go of the chainsaw.

■ Avoid an abnormal posture. This will prevent

inadvertent contact with the tip of the rail and

allows a better control of the chainsaw in unex-

pected situations.

I have a PAHE 20-LI A1 rechargeable pruner. the electric motor is faulty. where can I request a replacement? my email is plalazza@libero.it
Thank you Submitted on 26-3-2024 at 20:48
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAHE 20-Li A1 - IAN 315261 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PAHE 20-Li A1 - IAN 315261 Manual

Product: