Manual Parkside PAHE 20-Li A1 - IAN 315261 (page 27 of 141) (English, German, Dutch, French, Polish)

722849

Zoom out

Zoom in

1/141

│

23 ■

PAHE 20-Li A1

Cut length: approx. 200 mm

Blade: 8” Oregon 080NDEA318

Saw chain: Oregon 91P033X

Use only the following battery to operate the

cordless tool: PAP 20 A3

Type: LITHIUM ION

Rated voltage: 20 V

(direct current)

Capacity: 4000 mAh / 80 Wh

Cells: 10

Use only the following high-speed battery

charger to charge the cordless tool:

PLG 20 A2

INPUT:

Rated voltage: 230–240 V

, 50Hz

(alternating current)

Power consumption: 85 W

Fuse (internal): 3.15 A

T3.15A

OUTPUT:

Rated voltage: 21.5 V

(direct current)

Charging current: 3.5 A

Charging time: approx. 80 min

Protection class: II /

(double shielded)

Noise and vibration data:

Measured values for noise determined in accord-

ance with EN ISO 22868. The A-rated noise level

of the power tool is typically as follows:

Sound pressure level: L

= 88 dB (A)

Uncertainty: K

= 3 dB

Sound power level: L

= 106 dB (A)

Uncertainty: K

= 3 dB

Wear ear protection!

Vibration values (vector total of three directions)

determined in accordance with EN ISO 22867:

Vibration: < 2.5 m/s

Uncertainty K = 1.5 m/s

WARNING!

■ Also reduce the risk due to vibrations, e.g.

the risk of Raynaud's phenomenon, by taking

frequent breaks and rubbing your hands

together!

NOTE

► The sound pressure level must be reduced to

such an extent that the operator’s health is

not adversely aﬀected depending on the use

and the activities to be carried out. The sound

pressure level at the workplace can exceed

80 dB (A). In this case, sound insulation

measures are required for the operator

(e.g. wearing ear protectors).

► The vibration level speciﬁed in these instruc-

tions has been measured in accordance with

a standardised measuring procedure speci-

ﬁed and can be used to make equipment

comparisons. The speciﬁed vibration emission

value can also be used to make an initial

exposure estimate.

WARNING!

► The vibration level varies in accordance with

the use of the power tool and may be higher

than the value speciﬁed in these instructions

in some cases. There is a risk of underestima-

tion of the vibration load if the power tool is

used regularly in this manner. Try to keep the

vibration loads as low as possible. Meas-

ures to reduce the vibration load are, e.g.

wearing gloves and limiting the working time.

In this case all states of operation must be

included (e.g. times when the power tool is

switched oﬀ and times where the power tool

is switched on but running without load).

Explanation of symbols on the appliance:

Read the operating instructions

and safety advice before initial

operation!

Wear protective gloves!

Wear safety shoes!

Wear ear protection!

I have a PAHE 20-LI A1 rechargeable pruner. the electric motor is faulty. where can I request a replacement? my email is plalazza@libero.it
Thank you Submitted on 26-3-2024 at 20:48
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAHE 20-Li A1 - IAN 315261 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PAHE 20-Li A1 - IAN 315261 Manual

Product: