764053
16
Zoom out
Zoom in
Previous page
1/68
Next page
PAH 1300 A1 GBIE 13
Installation
Additional handle:
You can position the additional handle as
you wish.
Undo the knurled nut .
Swing the additional handle around the
appliance axis or 180° forward or backward
into the desired position (see foldout page).
Retighten the knurled nut .
Fitting a tool:
Pull the locking sleeve backwards.
Insert the tool with a rotating movement in the
tool holder until it clicks into itself.
Release the locking sleeve .
This locks the holder.
Check that the tool is properly locked by pulling
it. The system has radial play because of the
design.
Removing a tool:
Pull the locking sleeve backwards and pull
the tool out of the tool holder .
Adjust chisel position:
You can adjust the flat chisel in optimal
working position.
Place the flat chisel into the tool holder .
Push the chisel adjustment ring forward and
turn with the chisel adjustment ring the flat
chisel to the required position.
Release the chisel adjustment ring and turn
him until it clicks.
Operation
Switching on and off
During operation, you can choose between instan-
taneous and continuous operation.
Switching to instantaneous operation:
Press the ON/OFF switch .
Switching off instantaneous operation:
Release the ON/OFF switch .
Switching to continuous operation:
Press the ON/OFF switch and lock it in this
position with the locking switch .
Switching off continuous operation:
Press the ON/OFF switch and release it
again.
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work
on the appliance.
The appliance must always be kept clean, dry
and free from oil or grease.
Use a soft, dry cloth to clean the housing.
Clean the tool holder regularly:
Before fitting a tool into the tool holder ,
grease it lightly.
WARNING!
If the replacement of the supply cord is nec-
essary, this has to be done by the manufac-
turer or his agent in order to avoid a safety
hazard.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PAH 1300 A1 - IAN 285125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAH 1300 A1 - IAN 285125 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info