722820
26
Zoom out
Zoom in
Previous page
1/105
Next page
PAEXS 20-Li A1
22 GBIE
Attaching/disconnecting the battery
pack to/from the appliance
Inserting the battery pack
Push the battery pack into the handle until it
clicks into place.
Removing the battery pack
Press the release button and remove the
battery pack .
Checking the battery charge level
To check the battery status, press the battery
charge level button (see fig. A). The status
will be shown on the battery display LED as
follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Selecting a sanding sheet
Removal and surface
The material removal rate and surface quality are
determined by the grain strength of the sanding
sheet.
Please note that you need to use appropriate
sanding sheets with different grains for working
different materials.
Fitting the sanding sheet
WARNING!
Remove the battery pack before carrying out
any work on the appliance.
NOTE
Before fitting a new sanding sheet , remove
any dust and dirt from the sanding plate .
Attaching sanding sheets using Velcro
You can attach the sanding sheet to the
sanding plate using the Velcro.
Make sure that the extraction holes on the
sanding sheet match up with those on the
sanding plate .
Removing sanding sheets fitted using Velcro
Simply pull the sanding sheet off the sanding
plate .
Dust extraction
WARNING! RISK OF FIRE!
There is a risk of fire when working with
power tools fitted with a dust collection box
or which can be connected to a vacuum
cleaner via the vacuum cleaner adapter! In
unfavourable conditions, e.g. when sparks
are flying while sanding metal or metal
residues in wood, wood dust in the dust sack
(or in the vacuum cleaner dust bag) can
spontaneously ignite. This is a particular risk
if the wood dust is mixed with paint residues
or other chemicals and the workpiece has
become hot after being worked for a long
time. Therefore, do not allow the workpiece
to overheat and always empty the dust box
or the dust bag in the vacuum cleaner before
taking a break from work.
Wear a dust mask!
NOTE
Perforated sanding sheets are required for
dust extraction.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PAEXS 20-Li A1 - IAN 308551-1907 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAEXS 20-Li A1 - IAN 308551-1907 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info