722879

Parkside PABSW 10.8 A1 - IAN 86583 Manual

69
Zoom out
Zoom in
Previous page
1/82
Next page
GB
- 69 -
get the fl uid in your eyes, also seek
medical advice. Leaking battery fl uid can
cause skin irritation or burns.
6. Service
a) Have your electric tool repaired only
by trained personnel using only genu-
ine spare parts. This will ensure that your
electric tool remains safe to use.
Hold the equipment by the insulated
handles when carrying out work during
which the screw or the plug-in tool could
strike concealed power cables. Contact
with a live cable may also make the metal parts of
the equipment live and cause an electric shock.
Additional safety instructions
We pay a great deal of attention to the design of
every battery pack to ensure that we supply you
with batteries which feature maximum power den-
sity, durability and safety. The battery cells have a
wide range of safety devices. Each individual cell
is initially formatted and its electrical characteristic
curves are recorded. These data are then used ex-
clusively to be able to assemble the best possible
battery packs. Despite all the safety precau-
tions, caution must always be exercised
when handling batteries. The following
points must be obeyed at all times to en-
sure safe use.
Safe use can only be guaranteed if unda-
maged cells are used. Incorrect handling
can cause cell damage.
Important: Analyses confi rm that incorrect use
and poor care are the main causes of the damage
caused by high performance batteries.
Information about the battery
•
The battery pack supplied with your cordless
tool is not charged. The battery pack has to
be charged before you use the tool for the first
time.
•
For optimum battery performance avoid low
discharge cycles. Charge the battery pack
frequently.
•
Store the battery pack in a cool place, ideally
at 15°C and charged to at least 40%.
•
Lithium-ion batteries are subject to a natural
ageing process. The battery pack must be
replaced at the latest when its capacity falls
to just 80% of its capacity when new. Wea-
kened cells in an aged battery pack are no
longer capable of meeting the high power
requirements and therefore pose a safety risk.
•
Do not throw battery packs into an open fire.
There is a risk of explosion!
•
Do not ignite the battery pack or expose it to
fire.
•
Do not exhaustively discharge bat-
teries. Exhaustive discharge will damage
the battery cells. The most common cause of
exhaustive discharge is lengthy storage or
non-use of partly discharged batteries. Stop
working as soon as the performance of the
battery falls noticeably or the electronic pro-
tection system triggers. Place the battery pack
in storage only after it has been fully charged.
•
Protect batteries and the tool from
overloads. Overloads will quickly result in
overheating and cell damage inside the bat-
tery housing without this overheating actually
being apparent externally.
•
Avoid damage and shocks. Replace bat-
teries which have been dropped from a height
of more than one meter or which have been
exposed to violent shocks without delay, even
if the housing of the battery pack appears to
be undamaged. The battery cells inside the
battery may have suffered serious damage. In
this respect, please also read the waste dispo-
sal information.
•
If the battery pack suffers overloading and
overheating, the integrated protective cut-off
will switch off the equipment for safety rea-
sons. Important. Do not press the ON/OFF
switch any more if the protective cut-off has
actuated. This may damage the battery pack.
•
Use only original battery packs. The use of
other batteries may result in injuries, explosion
and a fire risk.
Anl_4513640.indb 69Anl_4513640.indb 69 27.11.12 13:4927.11.12 13:49
… 69 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PABSW 10.8 A1 - IAN 86583 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PABSW 10.8 A1 - IAN 86583 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info