744059

Parkside PABSS 3 6 Li IAN 49365 Manual

52
Zoom out
Zoom in
Previous page
1/60
Next page
6. Technical data
Motor power supply: 3.6 V DC
Idling speed: 200 rpm
Clockwise/Counter-clockwise: Yes
Charge voltage for rechargeable
battery: 6,8 V DC
Charge current for rechargeable
battery: 550 mA
Battery charger supply voltage: 230V ~ 50 Hz
Charging time: 3 hours
Battery type: Li-Ion/1.5 Ah
Weight: 0.4 kg
LED Class 1
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
Sound pressure level L
pA
62 dB(A)
Uncertainty K
pA
3 dB
Sound power level L
WA
73 dB(A)
Uncertainty K
WA
3 dB
Wear ear-muffs.
The impact of noise can cause damage to
hearing.
Total vibration values (vector sum of three
directions) determined in accordance with EN
60745.
Screws without hammer action
Vibration emission value a
h
≤ 2.5 m/s
2
Tolerance K = 1.5 m/s
2
Caution:
The vibration value changes according to the
area of application of the electric tool and may
exceed the specified value in exceptional
circumstances.
Keep the noise emissions and vibrations to
a minimum.
Only use appliances which are in perfect
working order.
Service and clean the appliance regularly.
Adapt your working style to suit the
appliance.
Do not overload the appliance.
Have the appliance serviced whenever
necessary.
Switch the appliance off when it is not in
use.
Wear protective gloves.
7. Before starting the equipment
Caution:
Be sure to read the following information before
you use your cordless screwdriver for the first
time:
1. Only charge the battery pack using the
charger (11) supplied.
2. Only use screwdriver bits which are in
perfect working order and appropriate.
3. When screwing into walls or partitions, test
these for electrical, gas or water
connections.
8. Operation
8.1 Charging the battery pack (Fig. 1)
The battery pack is protected from exhaustive
discharge. An integrated protective circuit
automatically switches off the equipment when
the battery pack is flat. In this case the bit chuck
(1) will cease to turn.
Caution:
Do not press the ON/OFF switch (9) any more,
if the protective circuit has actuated. This may
damage the battery pack.
1. Check that your mains voltage is the same
as that marked on the rating plate of the
battery charger. Plug the battery charger
(11) in the plug socket and connect the
charging cable (12) to the charging
connection (8). The charging process starts
GB/
MT
52
Anleitung_4513425:_ 22.12.2009 14:07 Uhr Seite 52
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PABSS 3 6 Li IAN 49365 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PABSS 3 6 Li IAN 49365 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PABSS 3 6 Li IAN 49365

Parkside PABSS 3 6 Li IAN 49365 Usermanual and installation guide - German, Dutch, French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info