679139

Parkside PABS 20-Li D4 - IAN 309611 Manual

12
Zoom out
Zoom in
Previous page
1/43
Next page
PABS 20-LI D4
■ 6 
│
 GB
│
IE
│
NI
│
CY
Before use
Charging the battery pack (see fig. A)
CAUTION!
► Always pull out the plug before you remove
the battery pack
from or connect the
battery pack to the charger.
■ Never charge the battery pack when the
ambient temperature is below 10°C or above
40°C.
♦ Connect the battery pack to the rapid bat-
tery charger (see Fig. A).
♦ Insert the power plug into the socket. The con-
trol LED lights up red to indicate that the
appliance is charging.
♦ The green control LED indicates that the
charging process is complete and the battery
pack is ready.
♦ Insert the battery pack back into the appli-
ance (see Fig. B).
Attaching/disconnecting the battery
pack to/from the appliance
Inserting the battery pack:
♦ Push the rotation direction switch into the
middle position (lock) (see Fig. C). Allow the bat-
tery pack to click into the handle (see Fig. B).
Removing the battery pack:
♦ Press the release button and remove the bat-
tery pack (see Fig. D).
Checking the battery charge level
♦ Press the battery charge level button to check
the charge level of the battery (see Fig. E). The
status/remaining charge will be shown on the
battery display LED as follows:
♦ GREEN/RED/ORANGE = maximum charge/
performance
RED/ORANGE = medium charge/performance
RED = low charge – charge the battery
Changing tools
Your cordless drill has a fully automatic spindle
lock .
When the motor is stopped, the power train locks
so that the chuck
can be opened by turning
it
. After you have attached the desired tool
and tightened it by turning the chuck , you can
continue working (see Fig. F). The spindle lock is
automatically released when the motor starts (ON/
OFF switch
pressed).
Torque selection ring/drill setting
You can set the torque using the torque selection
ring (see Fig. G).
♦ Select a low level for small screws or soft materials.
♦ Select a high level for large screws, hard materi-
als or removing screws.
♦ Select the drill setting for drilling work by adjust-
ing the torque selection ring
to the position
(see Fig. H).
2 speed gearbox
CAUTION!
► Only operate the gear selection switch
when the appliance is at a standstill. Other-
wise the appliance can be damaged.
In first gear (gear selector switch
in posi-
tion: 1) (see Fig. I)
you can reach a speed of approx. 400 rpm and a
high torque. This setting is suitable for all screwing
jobs.
In second gear (gear selector switch
in
position: 2) (see Fig. J)
you can reach a speed of approx. 1400 rpm for
carrying out drilling work.
… 12 …


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-pabs-20-li-d4---ian-309611

Reset search

  • Hi
    Please I have anew cordless drill pabas 20-li
    D4
    I have bought it from Paris last month I remarked that battery chager unit dos not charg the battary unit
    Input voltage for drill is 250v
    Nominal volt in egypt here is 220V in houses
    I ask if it may be this the rison that make the pattery chager does not charge the battaries
    so what can I do ...I am from egypt and there is not any agency for you here
    can help me to adjust this unit my self
    Thanks so much
    Mr Hamdy abd ellatif
    Submitted on 13-9-2020 at 18:00

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PABS 20-Li D4 - IAN 309611 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PABS 20-Li D4 - IAN 309611 in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PABS 20-Li D4 - IAN 309611

Parkside PABS 20-Li D4 - IAN 309611 User Manual - German, Dutch, French - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info