Manual Parkside PABS 20-Li A1 - IAN 113378 (page 11 of 75) (English, German, Dutch, Danish, French, Swedish, Finnish)

722889

Zoom out

Zoom in

1/75

11 GB/IE

Changing tools

Your cordless drill has a fully automatic spindle

lock

Once the motor has come to a halt, the drive shaft

is automatically locked, so that the drill chuck

can be opened simply by turning it

After you have inserted the required bit and ﬁxed it

in place by turning the chuck

, you can immedi-

ately continue working. The spindle lock releases

itself automatically when the motor is started (by

operation of the ON / OFF switch

Speed preset / drilling stage

You can adjust the torque by using

torque pre-

selection.

Select a low setting for small screws, soft work

material.

Select a high setting for large screws, hard

work materials and for the extraction of screws.

For drilling, push the selector to the setting for

drilling, in that you adjust the torque pre-selector

to the position

2 Gear Drive

CAUTION! Move the gear selector switch

only after the device has come to a standstill.

Failure to observe this advice may result in damage

to the device.

In the ﬁrst gear (Gear selector switch

in Position: 1)

A speed of up to approx. 400 rpm can be achieved

and a high torque. This setting is intended for use w

ith

all screwing tasks and for accessories (see example

Fig. B).

In the second gear (Gear selector switch

in Position: 2)

It achieves a speed of up to approx. 1400 rpm, for

the carrying out of drilling tasks (see example Fig. A).

Operation

Switching ON / OFF

Switching on:

To start the appliance squeeze on the ON /

OFF switch

and then keep it pressed down.

The LED working light

comes on with a slightly

or fully pressed ON /OFF switch

and illumi-

nates the working area in poor lighting conditio

ns.

Switching off:

To stop the appliance, release the ON / OFF

switch

Setting the speed

The ON / OFF switch

has a variable speed con-

trol device. Slight pressure on the ON / OFF switch

will cause the rotation speed to slow down. With

increased pressure, the rotational speed will increase.

Note: The integrated engine brake means that the

device will come to a fast standstill.

Switching direction of rotation

To switch the direction of rotation, push the di-

rection of rotation switch

to either the right

or to the left.

Tips and Tricks

Before you use the appliance, check to see that

the screw or drill bit is properly ﬁtted, i.e. located

centrally in the chuck.

Screw bits are designated with their dimensions

and their shape. If you are unsure, always try

the particular screw bit out to see whether it sits

in the screw head without any free play.

Torque:

Smaller screws and bits in particular can be

easily damaged if you adjust the appliance with

too high a torque and / or rotation speed.

Start-up / OperationGeneral safety advice for electrical power tools / Start-up

We have a Parkside PABS 20-Li A1.
AKKU-BOHRSCHAUBER CORDLESS DRILL.
Manufacturer: 2015-07
IAN 113378 S/N:068169
The battery and charger was stolen about 2 years ago.
If you can be of service to us, please respond quickly with photos of the Parkside machine and the price of the battery and charger.

We thank you in advance with best regards.

Amersingh R.
App: +597 8827871 Submitted on 13-11-2022 at 18:07
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PABS 20-Li A1 - IAN 113378 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 1,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PABS 20-Li A1 - IAN 113378 Manual

Product: