576607
26
Zoom out
Zoom in
Previous page
1/34
Next page
26 GB
Introduction
Cordless drill PABS 14.4 A1
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They con-
tain important information concerning safety, use
and
disposal. Before using the product, please familiar-
ise yourself with all of the safety information and
instructions for use. Only use the unit as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.
Intended purpose
This appliance is designed for drilling and screwing
into wood, plastic and metal. Use the appliance only
as described and only for the purposes indicated.
Any other uses, and modifications to the appliance,
are deemed to be improper usage and may result
in serious physical injury. The manufacturer accepts
no responsibility for damage(s) resulting from im
proper
usage. The appliance is not intended for commer-
cial use.
Equipment Components
1
Gear selector switch
2
Direction of rotation switch / lock
3
ON / OFF Switch / R.P.M. regulator
4
Rechargeable battery pack
5
Battery pack release button
6
Rechargeable battery display LED
7
Rechargeable battery charge state button
8
LED working light
9
Drill chuck
10
Torque pre-selector
11
Fast charger
12
Red charge-control LED
13
Green charge-control LED
Scope of delivery
1 Cordless drill with rechargeable battery pack
1 Bit PZ2 50 mm
1 Fast charger
1 Carry case
1 Directions for use
Technical Data
PABS 14.4 A1 Cordless drill:
Nominal voltage: 14.4 V
Idle-running speed: 1st gear: max. 400 min
-1
Idle-running speed: 2nd gear: max. 1300 min
-1
Drill chuck
clamping range: max. 10 mm
Max. torque: 25 Nm
PABS 14.4 A1-1 Battery Pack:
Type: LITHIUM-ION
Nominal voltage: 14.4 V
Capacity: 1.3 Ah
PABS 14.4 A1-2 Fast Charger:
INPUT:
Nominal voltage: 230 V∼, 50 Hz
Power input: 30 W
OUTPUT:
Nominal voltage: 14.4 V
Charging current 1.5 A
Charging time: approx. 60 min
Protection class: II /
Noise and vibration data:
Measured values for noise are determined in accor-
dance with EN 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level: 67 dB(A)
Sound power level: 78 dB(A)
Uncertainty K: 3 dB
Introduction / General safety advice for electrical power tools
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PABS 14.4 A1 - IAN 102649 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PABS 14.4 A1 - IAN 102649 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info