Manual Parkside IAN 93497 PSFS 250 A1 (page 7 of 58) (English, German, Dutch, French, Swedish)

745190

Zoom out

Zoom in

1/58

7 GB/IE

Introduction / General safety advice for electrical power tools

may exceed the value speciﬁed in these instructions.

Regularly using the electric tool in such a way may

make it easy to underestimate the vibration.

Note: If you wish to make an accurate assessment

of the vibration loads experienced during a particu-

lar period of work, you should also take into account

the intervening periods of time when the device is

switched oﬀ or is running but is not actually in use.

This can result in a much lower vibration load over

the whole of the work period.

General safety advice for

electrical power tools

Please read all safety in-

formation and instructions. Failure to observe

the safety information and instructions can result in

electric shock, fire and / or serious injury.

For future reference keep all the safety

advice and instructions in a safe place.

The term “electrical tool” used in the safety advice

refers to electrical tools powered by mains electric-

ity (by means of a mains lead) and electrical tools

mains lead).

1. Workplace safety

a) Keep your working area clean and

well lit. Untidy or poorly lit working areas can

lead to accidents.

b) Do not work with the device in poten-

tially explosive environments, which

contain inflammable liquids, gases or

dusts. Electrical power tools create sparks

which can ignite dusts or fumes.

c) Keep children and other people away

whilst operating the electrical tool.

Distractions can cause you to lose control of

the device.

2. Electrical safety

a) The mains plug on the device must

match the mains socket. The plug must

not be modified in any way. Do not

use an adapter plug with devices fitted

with a protective earth. Unmodified plugs

and matching sockets reduce the risk of elec-

tric shock.

b) Avoid touching grounded surfaces

such as pipes, radiators, ovens, and

refrigerators. There is a higher risk of elec-

tric shock if your body is earthed.

c) Keep the device away from rain or

moisture. The penetration of water into the

electrical device increases the risk of an elec-

tric shock.

d) Do not use the mains lead for any pur-

pose for which it was not intended, e.g.

to carry the device, to hang up the de-

vice or to pull the mains plug out of the

mains socket. Keep the mains lead

away from heat, oil, sharp edges or

moving parts of the device. Damaged or

tangled cables increase the risk of an electric

shock.

e) When using electric power tools out-

doors always use extension cords

approved for outdoor use. The use of

an extension cable suitable for outdoor use

reduces the risk of electric shock.

f) Use a residual current device for pro-

tection if the operation of the electrical

power tool in a moist environment

cannot be avoided. The use of an residual

current operated device reduces the risk of

electric shock.

3. Personal safety

a) Remain alert at all times, watch what

you are doing and always proceed

with caution. Do not use the device if

you are tired or under the influence

of drugs, alcohol or medication. One

moment of carelessness when using the electric

tool can lead to serious injury.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 93497 PSFS 250 A1 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 1,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 93497 PSFS 250 A1 Manual

Product: