Manual Parkside IAN 93483 (page 5 of 22) (English, German, Dutch, French, Swedish, Finnish)

655519

Zoom out

Zoom in

1/22

Operating pressure / Rated pressure .max.

110 bar / 11 MPa

Pressure ................max. 160 bar / 16 MPa

Max. pumping rate, water........... 450 l/h

Technical and optical changes can be

carried out in the course of further develop-

ment without notice. All dimensions, refer-

ences and information of this instruction

manual are therefore without guarantee.

Legal claims, which are made on the basis

of the instruction manual, cannot thus be

considered as valid.

Safety information

Please also observe the safety in-

structions for your pressure washer.

To avoid accidents and injuries:

Pressure washers can be dan-

gerous if used incorrectly. Do

not direct the jet at people, an-

imals, live electrical equipment

or the equipment itself.

• This appliance is not intended for use

by persons (including children) with

reduced physical, sensory or mental

capabilities, or lack of experience and

knowledge, unless they have been

given supervision or instruction concern-

ing use of the appliance by a person

responsible for their safety.

• Children should be supervised to ensure

that they do not play with the appli-

ance.

• Operation of the equipment is not per-

mitted for people under the age of 16.

• Wear goggles to protect your eyes

against loose dirt while working.

• To avoid damage and personal injury,

only use the unit on leak-tight pipes and

drains that are resistant to pressure.

• Do not leave equipment unattended in

the workplace.

• Switch on the pressure washer only

when the pipe cleaning hose is at least

up to the red marking in the pipe to be

cleaned.

• During high pressure operation, do not

pull the inserted hose completely out of

the pipe to be cleaned. You might be

injured by the four pressure jets coming

out at the back.

• The maximum washing temperature

must not exceed 60°C. The hose could

be damaged.

Initial Operation

1. Connect the connecting piece

(4) to the pressure washer spray

gun Parkside (8). Turn it by 90°

until it engages (bayonet joint).

2. Push the pipe cleaning hose (3) at

least up to the red safety marking

(7) into the pipe to be cleaned.

Caution! The red safety marking

must be in the pipe before the

pressure washer is switched on.

The high-pressure jet could cause

injury.

3. Switch on the pressure washer

and squeeze the trigger on the

spray gun (

8).

4. Whilst the nozzle head (5) is

moving through the pipe indepen-

dently, feed in the pipe cleaning

hose (3) manually.

5. To release blockages, squeeze the

trigger several times in a row then

release it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 93483 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 0,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 93483 Manual

Product: