745134

Parkside IAN 90882 PHKSU 710 A1 Manual

30
Zoom out
Zoom in
Previous page
1/40
Next page
27
PHKSU 710 A1
GB
WARNING!
► The vibration level specifi ed in these instruc-
tions has been measured in accordance
with the standardised measuring procedure
specifi ed in EN 60745 and can be used to
make equipment comparisons. The specifi ed
vibration emission value can also be used to
make an initial exposure estimate. The vibra-
tion level varies in accordance with the use of
the electric tool and may be higher than the
value specifi ed in these instructions in some
cases. The vibration load could be underesti-
mated if the electric tool is regularly used in
such a way.
NOTE
►
For an accurate estimate of the vibration
load during a certain working period, the
times during which the device is switched
off or is running but not actually being used
must also be taken into consideration. This
can signifi cantly reduce the vibration load
over the total working period.
General Safety Instruc-
tions for Electric Tools
WARNING!
► Please read all of the safety instructions.
Failure to follow the safety instructions listed
below can result in electric shock, fi re and/or
serious injuries.
Keep all safety instructions and other
instructions for future use.
The term “electric tool” used in the safety instructions
relates to mains-operated electric tools (with power
cable) and battery-operated electric tools (without
power cable).
1. Workplace safety
a) Keep your workplace clean and well-lit.
Untidy and poorly-lit working areas can lead
to accidents.
b) Do not work with the electric tool in potentially
explosive areas in which fl ammable liquids,
gases or dust are located. Electric tools produce
sparks which could ignite the dust or vapours.
c) Keep children and other persons a safe
distance away when using electric tools.
If you get distracted, you could lose control
over the device.
2. Electrical safety
a) The plug on the device must fi t into the mains
socket. The plug may not be altered in any
way. Do not use adapter plugs together with
earthed devices. Unmodifi ed plugs and suitable
wall sockets reduce the risk of electric shock.
b) Avoid bodily contact with earthed surfaces,
such as pipes, radiators, ovens and refriger-
ators. There is an increased risk of electric
shock if your body is earthed.
c) Keep electric tools away from rain and mois-
ture. If water or moisture penetrates an electric
tool the risk of electric shock increases.
d) Do not misuse the electrical cable, e.g. to carry
the device, hang it up or to pull the plug from
the socket. Keep the cable away from heat, oil,
sharp edges and moving device components.
Damaged or tangled cords and defective plugs
increase the risk of electric shock.
e) If you are working with an electric tool out-
doors, use only extension cables that are
also approved for use outdoors. The use of
an extension cord certifi ed for outdoor use
reduces the risk of electric shock.
f) If use of the electric tool in a humid environ-
ment is unavoidable, use a residual current
device (RCD). The use of a residual current
circuit-breaker system reduces the risk of electric
shock.
IB_90882_PHKSU710A1_LB2.indb 27IB_90882_PHKSU710A1_LB2.indb 27 22.07.13 14:2022.07.13 14:20
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 90882 PHKSU 710 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 90882 PHKSU 710 A1 in the language / languages: French as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 90882 PHKSU 710 A1

Parkside IAN 90882 PHKSU 710 A1 User Manual - English, German, Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info