Manual Parkside IAN 90851 PSDS 240 A1 (page 48 of 58) (French, Italian)

745133

Zoom out

Zoom in

1/58

- 48 -

14. Disconnect tools

– When not in use, before servicing, and

when changing accessories such as blades,

bits and cutters.

15. Remove adjusting keys and wrenches

– Form the habit of checking to see that keys

and adjusting wrenches are removed from

tool before turning it on.

16. Avoid unintentional starting

– Don‘t carry plugged-in tool with ﬁ nger on

switch. Be sure switch is off when plugging in.

17. Outdoor use extension cords

– When tool is used outdoors, use only exten-

sion cords intended for use outdoors and so

marked.

18. Stay alert

– Watch what you are doing. Use common

sense. Do not operate tool when you are ti-

red.

19. Check damaged parts

– Before further use of the tool, a guard or

other part that is damaged should be care-

fully checked to determine that it will operate

properly and perform its intended function.

Check for alignment of moving parts, binding

of moving parts, breakage of parts, mounting,

and any other conditions that may affect its

operation. A guard or other part that is dama-

ged should be properly repaired or replaced

by an authorized service center unless other-

wise indicated elsewhere in this instructions

manual. Have defective switches replaced by

an authorized service center. Do not use tool

if switch does not turn it on and off.

20. Warning

– The use of any other accessory or attach-

ment other than recommended it this ope-

rating instruction or the Einhell catalog may

present a risk of personal injury.

21 . Have your tool repared by an expert

– This electric appliance is in accordance with

the relevant safety rules repairing of electric

appliances may be carried out only by ex-

perts otherwise it may cause considerable

danger for the user.

22. Connect the dust extraction device

Wherever there are facilities for ﬁ tting a dust

extraction system, make sure it is connected

and used.

General safety regulations and accident

prevention

It is essential that you read the safety regulations

and operating instructions in their entirety and

follow the information contained therein in order

to eliminate the possibility of an accident or po-

tentially dangerous situation from occurring while

working with the machine.

•

Always check the device, the mains cable

and the plug before using the high-pressure

cleaner. Only operate the tool when it is in

good working order and is not damaged in

any way. Damaged parts have to be repla-

ced immediately by a qualified electrician.

•

Always pull the power plug out of the socket

outlet before doing any work on the machine,

before changing the grinding tool and whe-

never the machine is not being used.

•

To prevent damage to the power cable, al-

ways lead the power cable away from the

rear of the machine.

•

Keep the tools in a safe place and out of the

reach of children.

Use on materials containing asbestos is

prohibited.

Note the corresponding accident prevention re-

gulation (e.g. VBG 119 in Germany) issued by the

professional associations in your country.

•

Use only original replacement parts.

•

Repairs may only be carried out by a quali-

fied electrician.

•

The machine may exceed 85 db (A) at the

workplace. The operator will require noise

protection measures and ear muffs if this

is the case. The noise of this electric tool is

measured in accordance with IEC 59 CO 11,

IEC 704, DIN 45635 part 21, NFS 31-031

(84/537/EEC).

•

Ensure that you maintain a steady foothold.

Avoid abnormal working postures.

•

Do not expose your electric tool to rain. Ne-

ver use electric tools in damp or wet locations

Anl_4466148.indb 48Anl_4466148.indb 48 22.04.13 13:4022.04.13 13:40

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 90851 PSDS 240 A1 in the language / languages: French, Italian as an attachment in your email.

The manual is 2,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 90851 PSDS 240 A1

Parkside IAN 90851 PSDS 240 A1 User Manual - English, German, Dutch - 46 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 90851 PSDS 240 A1 Manual

Product: