745094

Parkside IAN 89570 PDEXS 150 A1 Manual

35
Zoom out
Zoom in
Previous page
1/39
Next page
35 GB
Safety instructions
Safety instructions / Before Initial Use
If using universal swivel couplings (coupling
discs) always use locking pins. Whip-check
hose safety cables must be used for protection
in the event the connection between the hose
and the machine or in between hoses fails.
Ensure not to exceed the maximum
pressure specified on the machine.
Never carry pneumatic tools by the
hose.
Original accessories / tools
Use only the accessories detailed in the
operating instructions. The use of inserted
tools or accessories other than those recom-
mended in the operating instructions could lead
to you suffering an injury.
Before Initial Use
Check that all of the unit‘s parts are in perfect
condition.
Selecting the sanding disc
Surface and stripping:
The quality of the surface und stripping performance
are determined by the grit size of the sanding disc.
Use the corresponding grinding discs with
different grain sizes for processing different
materials.
Changing the sanding disc
The compressed air orbital sander is fitted with
hook and loop fastening, allowing for quick and
easy sanding disc changes.
Lift the grinding disc at the side and pull it off
the disc wheel
6
.
Note: Clean any dust or dirt off the disc
wheel
6
before attaching a new sanding disc.
Be sure the openings in the sanding disc match
the openings on the disc wheel
6
.
Establishing connections
Note: Only use connection hoses
with a minimum inside diameter of 9 mm.
First wrap some Teflon tape (not included) around
the external threads of the plug nipple
3
.
Now screw the plug nipple
3
into the com-
pressed air connection of the orbital sander
4
.
Be sure to tighten this connection with pliers us-
ing moderate force
Now push the compressed air hose onto the
plug nipple
3
, using moderate force, until the
hose locks into place.
Dust / shavings extraction
Be sure to read and follow the „Safety Instruc-
tions“ section.
Using the internal vacuum extraction
with dust collection device (see Fig. B):
Slide the exhaust air hose
9
onto the connec-
tion of the dust extraction
2
.
Then slip the opening of the dust bag
10
over
the loose end of the extraction hose
9
and
fasten the dust bag
10
.
Note: Empty the dust bag
10
in a timely
fashion and regularly to ensure optimal dust
extraction. To do so, open the hook-and-loop
fastener at the side of the dust bag
10
.
Adding oil
To ensure a long service life for the compressed air
orbital sander the unit must always be adequately
filled with pneumatic oil.
You may ensure this in any of the follow-
ing ways:
Connect a service unit with an oiler to the
compressor.
Install a compressed air oiler in the air line or
to the compressor.
Manually add approx. 3-5 drops of pneumatic
oil to the plug nipple
3
every 15 operating
minutes.
89570_par_Druckluft_Exzenterschleifer_content_DE-NL-GB.indd 35 29.05.13 17:33
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 89570 PDEXS 150 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 89570 PDEXS 150 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 89570 PDEXS 150 A1

Parkside IAN 89570 PDEXS 150 A1 User Manual - French - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info