745116
30
Zoom out
Zoom in
Previous page
1/36
Next page
30 GB
Introduction / Safety of the fastener driving toolIntroduction
Pneumatic stapler PDT 40 C2
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
operating instructions are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, famil-
iarise yourself with all of the operating instructions
and safety instructions. Use the product only as de-
scribed and for the specified applications. If you
pass the product on to anyone else, please ensure
that you also pass on all the documentation with it.
Intended use
The device is suitable for assembly and repair work.
Any other use or modification to the device shall be
considered as improper use and could give rise to
considerable dangers. We will not accept liability
for loss or damage arising from improper use. The
device is intended for private domestic use only.
Features and fittings
1
Exhaust air aperture (can be rotated)
2
Trigger
3
Handle
4
Threaded nipple 6.35 mm (¼“)
5
Magazine
6
Fill level indicator
7
Knurled screw
8
Trigger lock
9
Mouth
10
Face plate
11
Face plate quick clamp lever
12
Magazine lever
Included items
1 Pneumatic stapler PDT 40 C2
1 Carrying case
1 Special compressed air oil
1 Threaded nipple 6.35 mm (¼“) (pre-assembled)
1 Package nails, 1000 pcs.
1 Package staples, 1000 pcs.
1 Protective glasses
1 Operating instructions
Technical data
Dimensions: 240 x 57 x 235 mm
(L x H x W)
Weight
(without fasteners): 1.255 kg
Trigger type: Compressed air
Maximum permissible
pressure: 8 bar
Recommended pressure
range: 4 to 7 bar
Air consumption per
drive in process: approx. 0.09 litre per
driving-in process
Recommended lubricant:
Compressed air special oil
Loading capacity: 100 pcs.
Nail lengths: 15 mm, 20 mm
25 mm, 30 mm,
32 mm, 35 mm,
38 mm, 40 mm,
45 mm, 50 mm,
Staple lengths: 10–40 mm
Staple width: 5.7 mm
Recommended
Hose diameter: ∅ 9 mm
Compressed air quality: Cleaned, oil-misted
and condensate-free
Noise and vibration data:
Measured values for noise are determined in ac-
cordance with EN 12549:1999, EN ISO 4871.
The A-weighted sound pressure level of the device
is typically 114.3 dB(A). The sound power level of
the device is 125.6 dB(A). Uncertainty K = 2.5 dB.
These values are characteristic values referenced to
the device and do not reflect noise development at
the work location. Noise development at the work
location depends e.g. on the work environment, the
workpiece, the workpiece support and the number
of fastener driving processes.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 89568 PDT 40 C2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 89568 PDT 40 C2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info