745090
49
Zoom out
Zoom in
Previous page
1/58
Next page
GB
- 49 -
Important!
Do not dab the workpiece with the electrode since
it could be damaged, making it more diffi cult to
ignite the arc.
As soon as the arc has ignited, attempt to keep it
a distance from the workpiece equivalent to the
diameter of the electrode. This distance should be
kept as constant as possible during the welding
process. The angle of the electrode in the direction
in which you are working should be 20/30°.
Important!
Always use tongs to remove spent electrodes and
to move parts that you have just welded. Please
note that the electrode holder (5) must always
be put down so that it is insulated after you have
completed the welding work. Do not remove the
slag until the weld has cooled. If you want to con-
tinue a weld after an interruption, the slag from
your initial attempt must fi rst be removed.
9. Overheating guard
The welding set is fi tted with an overheating guard
that protects the welding transformer from over-
heating. If the overheating guard trips, the control
lamp (7) on your set will be lit. Allow the welding
set to cool for a time.
10. Transpor t
Before transporting the welder you must fi rst dis-
connect the power plug and remove the ground
terminal from the workpiece. Then wind up the
cable properly. Now you can carry the welder to
a different place by the carry handle (1).
11. Maintenance
Remove dust and dirt from the equipment at regu-
lar intervals. Cleaning is best carried out with a
ne brush or a cloth.
12. Storage
Store the equipment and accessories out of
children’s reach in a dark and dry place at above
freezing temperature. The ideal storage tempe-
rature is between 5 and 30 °C. Store the electric
tool in its original packaging.
13. Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
For our latest prices and information please go to
www.isc-gmbh.info
14. Disposal and recycling
The unit is supplied in packaging to prevent its
being damaged in transit. This packaging is raw
material and can therefore be reused or can be
returned to the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic. De-
fective components must be disposed of as spe-
cial waste. Ask your dealer or your local council.
Anl_1549051.indb 49Anl_1549051.indb 49 17.10.12 16:1217.10.12 16:12
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 85053 PESG 120 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 85053 PESG 120 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info