Manual Parkside IAN 79416 PTS 480 A1 (page 29 of 34) (French)

745108

Zoom out

Zoom in

1/34

29 GB

General safety advice for electrical power tools

Hold the device by the insulated han-

dle surfaces when performing work

where there is danger of the tool used

striking hidden electrical lines or its

own power cable. Contact with a live wire

could cause metal parts of the device to be-

come live and lead to electric shock.

Safety instructions for all saws

a) DANGER: Stay with your hands out

of the cutting area and keep off the

cutting disc. If you hold the saw with both

hands, they cannot be injured by the saw blade.

b) Do not reach underneath the work-

piece. The protective cover will not protect

you from the saw blade under the work piece.

c) Adjust the cutting depth to the thick-

ness of the work piece. Less than the full

width of a tooth should be visible from under

the work piece.

d) Never hold the workpiece with the

hand or lay it over a leg. Secure the

workpiece on a stable fixture. It is

important to fix the work piece safely, to mini-

mise the danger of contact with the body,

jamming of the saw blade or loss of control.

e) Hold the electrical power tool by the

insulated handle surfaces when you

are undertaking work where there is

the danger of the tool striking hidden

electricity cables or the device’s mains

lead. Contact with a live wire could cause

metal parts of the electrical power tool to

become live and lead to electric shock.

f) When cutting along the way always

use a fence or a straight edge guide.

That improves the precision of the cut and mini-

mises the possibility that the saw blade jams.

g) Always use saw blades of the correct

size and with matching mounting hole

(e.g. star-shaped or round). Saw blades

not matching the attachments of the saw run

untrue and lead to loss of control.

h) Never use damaged or wrong saw

blade washers or bolts. The saw blade

washers and screws were specifically devel-

oped for your saw, for optimal performance

and operating security.

Reasons for and how to avoid a kickback:

- A kickback is the sudden reaction, if the saw

blade sticks, jams or is misaligned and the

uncontrolled saw moves out of the work piece

in the direction of the operator.

- If the saw blade wedges, sticks or jams itself

into the closing saw gap, it blocks and the mo-

tor power kicks the saw back into the direction

of the operator.

- If the saw blade is twisted or wrongly aligned

in the saw gap, the teeth of the rear blade edge

can jam in the surface of the work piece, caus-

ing the saw blade to move out of the saw gap

and the saw to jump back in the direction of

the operator.

A kickback is the result of wrong or unsuitable use

of the saw. It can be avoided by taking the in the

following described precautions.

a) Hold the saw with both hands and

bring your arms into a position that

allows you to absorb the forces of the

kickback. Always stand to the side of

the saw blade, never bring the saw

blade into a line with your body. Dur-

ing a kickback the saw can jump backwards,

however, the operator can master the forces of

the kickback with suitable preventive measures.

b) Should the saw blade jam, or you stop

the work, switch the saw off and hold

it still in the work piece, until the saw

blade has come to a standstill. Never

attempt to remove the saw from the

work piece or to pull it backwards, as

long as the saw blade moves, as oth-

erwise a kickback could occur. Find out

and rectify the reason for the jamming of the

saw blade.

c) If you want to restart a saw that is

stuck

in the workpiece, centre the saw blade

in the saw gap and check that the teeth

are not stuck in the workpiece. If the

saw blade jams, it can move out of the work

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 79416 PTS 480 A1 in the language / languages: French as an attachment in your email.

The manual is 1,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 79416 PTS 480 A1

Parkside IAN 79416 PTS 480 A1 User Manual - English, German, Dutch - 34 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 79416 PTS 480 A1 Manual

Product: