745108
28
Zoom out
Zoom in
Previous page
1/34
Next page
28 GB
General safety advice for electrical power toolsGeneral safety advice for electrical power tools
with caution when using an electrical
tool. Do not use the electrical power
tool if you are tired or under the influ-
ence of drugs, alcohol or medication.
One moment of carelessness when using the
electrical power tool can lead to serious injury.
b) Always wear protective equipment
and wear safety glasses. Depending on
the type of electrical tool and its application,
wearing personal protective equipment such
as ear protection, dust mask or work gloves
reduces the risk of injuries.
c) Avoid unintentional operation of the
device. Check that the electrical power
tool is switched off before you connect
it to the mains, pick it up or carry it.
Accidents can happen if you carry the electri-
cal tool with your finger on the ON / OFF switch
or with the device switched on.
d) Remove any setting tools or spanners
before you switch on the electrical tool.
A tool or spanner left attached to a rotating
part of an electrical tool can lead to injury.
e) Avoid placing your body in an unnat-
ural position. Keep proper footing and
balance at all times. By doing this, you will
be in a better position to control the electrical
power tool in unforeseen circumstances.
f) Wear suitable clothing. Do not wear
loose clothing or jewellery. Keep your
hair, clothing and gloves clear of mov-
ing parts. Loose clothing, jewellery or long
hair can become trapped in moving parts.
g) If vacuum dust extraction and collec-
tion devices are fitted, do not forget to
check that they are properly connected
and used correctly. The use of dust extrac-
tion reduces the hazard presented by dust.
4. Careful handling and use of
the electrical power tool
a) Do not overload the device. Always use
an electrical power tool that is intended
for the task you are undertaking. By
using the right electrical power tool for the job,
you will work safer and achieve a better result.
b) Do not use an electrical power tool if
its switch is defective. An electrical power
tool that can no longer be switched on and off
is dangerous and must be repaired.
c) Pull the mains plug from the socket
before you make any adjustments to
the appliance, change accessories or
when the device is laid aside. This pre-
caution prevents the unintentional start of the
electrical tool.
d) Always ensure that electrical power
tools are kept out of reach of children
when not in use. Do not let anyone
use the device if they are not familiar
with it or have not read the instructions
and advice. Electrical power tools are dan-
gerous when they are used by inexperienced
persons.
e) Maintain the electrical power tool care-
fully. Check that moving parts are work-
ing properly and move freely. Check for
any parts that are broken or damaged
enough to detrimentally affect the func-
tioning of the electrical power tool.
Have
damaged parts repaired before you use
the device. Many accidents have their origins
in poorly maintained electrical power tools.
f) Keep cutting tools clean and sharp.
Carefully maintained cutting tools with sharp
cutting edges are less likely to jam and are
easier to control.
g) Use the electrical power tool, accesso-
ries, inserted tools etc. in accordance
with these instructions. When doing
this, take the working conditions into
consideration, as well as the task at
hand. The use of electrical power tools for
purposes other than those intended can lead
to dangerous situations.
5. Service
a) Only have electrical power tools
repaired by qualified specialist per-
sonnel using OEM spare parts. This
ensures that the safety of the electrical power
tool is maintained.
79416_par_Tauchsaege_Content_DE-AT-NL.indd 28 07.12.12 12:47
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 79416 PTS 480 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 79416 PTS 480 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 79416 PTS 480 A1

Parkside IAN 79416 PTS 480 A1 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info