744949
38
Zoom out
Zoom in
Previous page
1/41
Next page
38 GB
Assembly / Bringing into use
Slide the blade guard
9
into the desired posi-
tion and fix it in that position by tightening the
knurled nuts
10
.
Q
Attaching the feet
12
(see Fig. B)
Attach the feet
12
from below through the
mounting holes in the device‘s base plate.
Q
Attaching the dust blow tube
1
(see Fig. C)
Screw the fan tube
1
clockwise and hand tight
into the designated opening.
Q
Bringing into use
CAUTION! Make sure that the device is
switched off before you connect it to the mains supply.
Always switch on the electrical power tool before
moving the workpiece against it. Otherwise
there is the risk of kickback.
Setting up the device:
Grab the device at the position labelled
“Please lift here” to position the device.
Switching on the device:
Press the green ON button
4
.
Switching off the device:
Press the red OFF button
3
.
Q
Setting the stroke rate
Turn the stroke rate controller
2
clockwise to
increase the stroke rate.
Turn the stroke rate controller
2
anticlockwise
to decrease the stroke rate.
NOTE: Be aware that too high a stroke rate leads
to the saw blade heating up, an increase in wear
of the saw blade and burn marks on the material.
Select a saw speed suitable for the material
being sawn.
Maximum
speed
Medium
speed
Minimum
speed
Thick woo-
den board
Straight
cut
Normal
fretsaw
work
-
Thin woo-
den or
plastic
board
Straight
and curved
cuts
Normal
and intri-
cate
fretsaw
work
Intricate
fretsaw
work
Q
Tilting the saw table
6
(see Figs. D, E)
Unscrew the angle setting screw
5
.
Tilt the saw table
6
until the desired is
reached.
NOTE: The angle can be read off the angle
scale
6 a
.
Retighten the angle setting screw
5
.
Q
Inserting / removing the
saw blade
7
DANGER OF INJURY!
Pull the mains plug out of the socket before you
carry out any task on the device,
Inserting the saw blade
7
:
Lift up the clamping lever
13
.
Insert the saw blade
7
through the opening in
the saw table
6
.
Ensure that the teeth of the saw blade
7
point
forwards and downwards.
Suspend the saw blade
7
in the bottom
blade mount
14
.
Then hook the top pin of the saw blade
7
in
the recess provided for this purpose in the top
saw blade mount
8
.
Lower the clamping lever
13
to tension the saw
blade
7
.
Turn the clamping lever
13
horizontally clock-
wise to increase the tension.
Bringing into use / Maintenance and cleaning / Service / Warranty / Disposal
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 75703 PDKS 120 B3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 75703 PDKS 120 B3 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info